Detail 01
8 mm thread
The common size on cymbal tilter rods and tom mounts. Measure the rod before ordering — 6 mm is also widespread on lighter stands.
Product detailSKU #1274115065155
Sound Percussion LabsSPC05 Pro Wing-Nuts 2-Pack 8 mm
Independent shopping perspective
The Korena take
Two 8 mm wing nuts for drum hardware. Replacement parts for cymbal stands and tom mounts where the originals have gone missing.
Strong match
Who this is for
- Replacing wing nuts lost during load-out or teardown
- Stocking spares in the hardware case before a tour
- Restoring a used kit that came with parts missing
Consider the trade-offs
When to look elsewhere
- Anyone whose hardware uses 6 mm threads — the size will not engage
- Players needing quick-release cymbal toppers instead of threaded nuts
- Hardware taking proprietary or metric-oddball threading
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Wing design
Tightens by hand with no tool, so you can strike a stand fast without a drum key in your pocket.
Detail 03
2-pack
Covers two stands, or one plus a spare. Wing nuts are the part most often left on the floor after a gig.
Detail 04
Metal construction
Holds up to repeated hand-tightening better than plastic wings, which strip out at the threads over time.
Final check
Know before you order
- 01Check the thread on your rod with an existing nut — 8 mm and 6 mm look similar by eye
- 02No felts, washers, or cymbal sleeves included, only the nuts
- 03Hand-tight is enough on cymbal tilters; overtightening cracks sleeves and restricts swing
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How do I tell if I need 8 mm or 6 mm?
Take a nut you already have to the rod, or measure the threaded rod's diameter. Heavier double-braced stands usually take 8 mm; lightweight stands often use 6 mm.
02Will these fit any drum brand?
They fit any hardware using standard 8 mm threading, which is common across brands. Proprietary or vintage hardware may not match.
03Can I use these on a cymbal stand tilter?
Yes, that's a main use, provided the tilter rod is 8 mm. They also fit tom mounts and other 8 mm threaded points on a kit.
04Do these come with felts or sleeves?
No. Just the two wing nuts. Felts, washers, and cymbal sleeves are sold separately.
