Detail 01
8 mm bore
Fits standard 8 mm cymbal tilter posts. Measure your post first — some stands use 6 mm.
Product detailSKU #1274115065177
Sound Percussion LabsSPC03 Flanged Cymbal Sleeve 4-Pack 8 mm
Independent shopping perspective
The Korena take
Four flanged sleeves that sit on 8 mm cymbal posts so the cymbal rides on plastic instead of metal. Replacement part for any drummer with worn sleeves.
Strong match
Who this is for
- Replacing split or missing sleeves on existing stands
- Keeping a spare set in the stick bag for gigs
- Stocking a practice room or school kit
Consider the trade-offs
When to look elsewhere
- Stands with 6 mm posts — wrong diameter, will not fit
- Anyone wanting felts or wing nuts too
- Hi-hat clutch use — that takes a different part
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Flanged base
The lip keeps the cymbal from sliding down onto the metal threads and cracking the hole.
Detail 03
4-pack
Covers a hi-hat top, crash, ride and one spare — roughly a starter kit's worth.
Detail 04
Plastic construction
Sacrificial by design. They wear and split over time; that's the sleeve doing its job instead of the cymbal.
Final check
Know before you order
- 01Measure your cymbal post diameter — 8 mm only
- 02Felt washers and wing nuts are not included
- 03Trim length with scissors if a sleeve sits too tall
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will these fit my stands?
Only if the threaded post is 8 mm. Measure the post with calipers or check the stand manual. A 6 mm post needs a 6 mm sleeve.
02Do these come with felts?
No. Sleeves only. You'll need felt washers above and below the cymbal separately.
03How often do sleeves need replacing?
When the flange splits or the cymbal starts contacting metal. Heavy players go through them faster; check them when you change heads.
04Can I cut them shorter?
Yes. Scissors or a razor work fine if a sleeve stands taller than your setup needs.
