Detail 01
6 mm
The post diameter it fits. 6 mm is the smaller of the two common sizes, so measure before ordering.
Product detailSKU #1274115064832
Sound Percussion LabsCymbal Sleeve 4-Pack 6 mm
Independent shopping perspective
The Korena take
Four 6 mm cymbal sleeves for stand tilter posts. Consumable part. Buy when the old ones are split, mashed, or missing.
Strong match
Who this is for
- Replacing chewed sleeves across a full cymbal setup
- Stopping metal-on-metal contact at the tilter post
- Keeping spares for hardware that lives in a truck
Consider the trade-offs
When to look elsewhere
- Stands whose tilter post is larger than 6 mm
- Anyone needing felts or wing nuts as well
- Drummers wanting to change cymbal sound or sustain
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
4-pack
Covers a hat top, ride, and two crashes in one order instead of piecing it out.
Detail 03
Sleeve, not felt
The sleeve protects the bell hole from the threaded post. Felts sit above and below and are a separate part.
Detail 04
Consumable
Sleeves split and compress with normal playing. Worn ones let the cymbal ride directly on threads and wear the bell hole.
Detail 05
Under six dollars
Cheap enough to replace the whole kit's worth at once rather than swapping one at a time.
Final check
Know before you order
- 01Measure your stand's tilter post. Many stands use 8 mm, not 6 mm
- 02Sleeves only, no felts or wing nuts included
- 03Replace split sleeves right away. Bare threads enlarge the cymbal hole
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many sleeves come in the pack?
Four, enough for a typical hats, ride, and two crash setup.
02Will these fit my cymbal stands?
They fit 6 mm tilter posts. Measure yours first, as 8 mm posts are also common and will not accept these.
03Do I get felts with these?
No. These are the sleeves that go through the cymbal hole. Felts and wing nuts are separate.
04How often should I replace them?
When they split, flatten, or slide loose. A worn sleeve puts the cymbal against bare threads and enlarges the mounting hole.
