Detail 01
Thick, not thin
More cushion between cymbal and stand, which damps a little sustain and lets the cymbal rock less freely.
Product detailSKU #1274115064918
Sound Percussion LabsSPC01 Thick Cymbal Felts 4-Pack
1/2
Independent shopping perspective
The Korena take
Four thick felt washers that cushion a cymbal on its stand. Replacements for the ones that flatten, tear, or disappear at gigs.
Strong match
Who this is for
- Replacing squashed felts that let a cymbal sit on metal
- Stocking spares for cymbals that get moved between gigs
- Setting up a stand that came without felts
Consider the trade-offs
When to look elsewhere
- Players wanting maximum sizzle and free swing from thin felts
- Hi-hat clutch setups needing specific hat-sized felts
- Anyone whose cymbal cracked from a bad angle or hard hits
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Four in a pack
Covers two cymbals if you run one felt above and one below, which is standard on a crash or ride stand.
Detail 03
Felt, not rubber or plastic
Compresses under the wing nut and absorbs stick shock, so the cymbal never contacts bare metal at the hole.
Detail 04
Fits over the stand's tilter post
Uses a standard 8mm cymbal stand thread. Works on most crash, ride, and boom stands.
Final check
Know before you order
- 01Sleeves and wing nuts are not included — check yours aren't worn too
- 02Two cymbals per pack if you use felts above and below
- 03Don't overtighten the wing nut; a choked cymbal cracks faster
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many cymbals does a 4-pack cover?
Two, using one felt below and one above each cymbal. If you only run a bottom felt, it covers four.
02Do thick felts change the sound?
A little. More cushion damps some sustain and restricts how freely the cymbal swings compared to a thin felt.
03Will these fit my stand?
They fit standard cymbal stand posts, which covers most crash, ride, and boom stands.
04Do I still need a plastic sleeve?
Yes. Felts protect the cymbal's face; the sleeve protects the bell hole from the threaded rod. They do different jobs.
