Detail 01
Eight channels
One cable carries eight DB25-to-XLR male channels.
Product detailSKU #1346994804744
MogamiGold 8 Channel DB25-XLR Male Snake Cable 3 ft.
Independent shopping perspective
The Korena take
Mogami Gold’s eight-channel snake connects a DB25 connection to eight male XLR connectors in a 3-foot format. It is aimed at professional studio and live-sound signal paths, with precision dielectrics described as preserving signal integrity. All-metal D-sub shells and XLR connectors support repeated setup and breakdown, while the included thumbscrews allow tool-free installation. The flexible PVC jacket helps with cable handling where a short multi-channel connection is needed. Mogami Gold backs the cable with a lifetime warranty.
Strong match
Who this is for
- Short eight-channel DB25-to-XLR male connections in studio or live-sound signal paths.
- Repeated setup and breakdown where all-metal connectors and tool-free thumbscrews are useful.
Consider the trade-offs
When to look elsewhere
- Runs requiring more than the 3-foot cable length identified for this product.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
All-metal D-sub shells and XLR connectors
The connector housings are metal.
Detail 03
Thumbscrews
Installation can be done without a tool.
Detail 04
Flexible PVC jacket
The cable has a 2.8 mm flexible PVC outer covering.
Final check
Know before you order
- 01Confirm the required reach before ordering: this product is identified as a 3-foot cable.
- 02Confirm that your connection needs a DB25 end and male XLR connectors.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many channels does this snake carry?
It is an eight-channel DB25-to-XLR male snake cable.
02How long is this version?
The product title identifies this version as 3 feet long.
03Are installation thumbscrews included?
Yes. Included thumbscrews allow tool-free installation.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black
2 detailsConnections & power
- Jacket Covering
- 2.8 Flexible PVC (0.110 inch)
- Voltage Breakdown
- Must withstand at DC 500V/15sec.
1 detailsIn the box
- Standard
- UL13 CL2 60 deg C
20 detailsOther
- Shield
- 0.031W/m(0.0095W/Ft)
- Served Shield
- Approx. 58/0.10A Served (spiral) Shield
- Inductance
- 0.6H/m(0.18H/Ft)
- Emigration
- Non-emigrant to ABS resin
- K1
- 12pF/m(3.7pF/Ft)
- Electromagnetic Noise At 10khz
- (Inductance of the toroidal core: 595H): 0.1mV Max.
- Microphonics Method
- Stepping on cable: 50mV Max. at 50kW Load
- Microphonics
- Method: Stepping on cable: 50mV Max. at 50kW Load
- Conductor
- 7/0.18A (0.178mmœ) #25AWG (7…#33AWG)
- Insulation
- 1.05 XLPE (Cross Linked Polyethylene) (0.0413 inch)
- Electrostatic Noise Hum Pick Up
- 2.5mV Max.
- Inductance of The Toroidal Core
- 595H): 0.1mV Max.
- Identification
- See core number identification table
- Tensile Strength of One Pair 26 Deg C 65 Rh
- 274N
- Applicable Temperature
- -20 deg C +70 deg C(-4 deg F +158 deg F)
- Capacitance At 1khz 20 Deg C Partial Capacitance Value See Figure 2
- K0: 140pF/m(42.7pF/Ft)
- DC Resistance At 20 Deg C
- Inner Pair Conductor: 0.11W/m(0.0336W/Ft)
- Insulation Resistance At DC 125v 20 Deg C
- 100000 MW … m Minimum
- Drain Wire
- 7/0.18A (Exactly same as conductor)
- Capacitance At 1khz 20 Deg C Partial Capacitance Value See Figure 1
- K0: 130pF/m(40pF/Ft); K1: 12pF/m(3.7pF/Ft)
