Detail 01
DB25 to eight XLRs
One multi-pin connector replaces eight individual cables, so a whole eight-channel block moves on a single plug.
Product detailSKU #1275776902247
MogamiGold 8 Channel DB25-XLR Female Snake Cable 10 ft.
Independent shopping perspective
The Korena take
A 10-foot eight-channel analog snake taking a DB25 connector out to eight female XLRs, for wiring converters and consoles to a patchbay or stage box.
Strong match
Who this is for
- Wiring an interface or converter's DB25 port to eight XLR connections
- Cleaning up a rack where eight separate cables would be a mess
- Permanent studio installs where the run is fixed at ten feet
Consider the trade-offs
When to look elsewhere
- Anyone whose gear has male XLR needs — these ends are female
- Stage runs longer than ten feet
- Gear with a DB25 wired to a non-standard pinout
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Female XLR ends
They accept male XLR plugs — the output side of mics, preamps and stage boxes.
Detail 03
25 AWG stranded conductors
Thin, seven-strand cores keep eight channels flexible in one jacket instead of stiff like eight separate cables.
Detail 04
Served spiral shield
A wrapped shield stays flexible and doesn't open gaps when the cable bends, unlike a stiff braid.
Detail 05
Electrostatic noise 2.5mV max, microphonics 50mV max
Handling noise and hum pickup are held low, which matters when eight low-level mic channels share one jacket.
Detail 06
Flexible PVC jacket, -20°C to +70°C
Stays workable in cold rooms and hot racks, so it isn't limited to climate-controlled installs.
Final check
Know before you order
- 01Check your gear's DB25 pinout matches before ordering — wiring standards vary
- 02Ten feet fixed; measure rack to patchbay first
- 03All eight ends are female XLR, so male-input gear needs a different cable
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many channels does it carry?
Eight, all through the single DB25 connector, breaking out to eight female XLRs at the other end.
02Does it work with my interface's DB25 port?
Only if the pinout matches. DB25 wiring isn't universal, so check your gear's documentation against the cable before ordering.
03Can I use it for mic inputs?
The female XLR ends accept male XLR outputs, and the shielding and low-noise figures suit low-level channels.
04How long is it?
Ten feet from the DB25 connector to the XLR ends.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black
2 detailsConnections & power
- Jacket Covering
- 2.8 Flexible PVC (0.110 inch)
- Voltage Breakdown
- Must withstand at DC 500V/15sec.
1 detailsIn the box
- Standard
- UL13 CL2 60 deg C
20 detailsOther
- Shield
- 0.031W/m(0.0095W/Ft)
- Served Shield
- Approx. 58/0.10A Served (spiral) Shield
- Inductance
- 0.6H/m(0.18H/Ft)
- Emigration
- Non-emigrant to ABS resin
- K1
- 12pF/m(3.7pF/Ft)
- Electromagnetic Noise At 10khz
- (Inductance of the toroidal core: 595H): 0.1mV Max.
- Microphonics Method
- Stepping on cable: 50mV Max. at 50kW Load
- Microphonics
- Method: Stepping on cable: 50mV Max. at 50kW Load
- Conductor
- 7/0.18A (0.178mmœ) #25AWG (7…#33AWG)
- Insulation
- 1.05 XLPE (Cross Linked Polyethylene) (0.0413 inch)
- Electrostatic Noise Hum Pick Up
- 2.5mV Max.
- Inductance of The Toroidal Core
- 595H): 0.1mV Max.
- Identification
- See core number identification table
- Tensile Strength of One Pair 26 Deg C 65 Rh
- 274N
- Applicable Temperature
- -20 deg C +70 deg C(-4 deg F +158 deg F)
- Capacitance At 1khz 20 Deg C Partial Capacitance Value See Figure 2
- K0: 140pF/m(42.7pF/Ft)
- DC Resistance At 20 Deg C
- Inner Pair Conductor: 0.11W/m(0.0336W/Ft)
- Insulation Resistance At DC 125v 20 Deg C
- 100000 MW … m Minimum
- Drain Wire
- 7/0.18A (Exactly same as conductor)
- Capacitance At 1khz 20 Deg C Partial Capacitance Value See Figure 1
- K0: 130pF/m(40pF/Ft); K1: 12pF/m(3.7pF/Ft)
