Detail 01
DB25 to TRS, 8 channels
One connector carries eight balanced signals. Both ends must be balanced gear; TRS here is line level, not headphone.
Product detailSKU #1275776902261
MogamiGold 8 Channel DB25-TRS Snake Cable 5 ft.
Independent shopping perspective
The Korena take
An 8-channel DB25-to-TRS breakout snake for connecting an interface or converter to outboard gear. For studios with balanced patchbays or multi-channel racks.
Strong match
Who this is for
- Linking an audio interface DB25 port to eight balanced TRS inputs
- Rack studios where a 5 ft run reaches the neighboring unit
- Permanent installs where the cable stays coiled behind a rack
Consider the trade-offs
When to look elsewhere
- Anyone needing XLR ends for mics or console preamps
- Runs longer than five feet between rack and desk
- Unbalanced or single-channel connections
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
5 ft length
Rack-to-rack distance. Measure before you order; there is no slack to route around a deep rack or under a desk.
Detail 03
Served spiral shield
Spiral shielding stays flexible when coiled and keeps rejecting noise. Good for cables that get moved and re-dressed.
Detail 04
Hum pickup 2.5mV max, 0.1mV at 10kHz
Low induced noise near power supplies and transformers, which matters when eight lines run together through a rack.
Detail 05
Capacitance 42.7 pF/ft
Low enough that high frequencies stay intact over this length. Capacitance only becomes audible on much longer runs.
Detail 06
#25AWG conductor, 0.110 in flexible PVC jacket
Thin conductors keep the eight-pair bundle manageable; the flexible jacket lets it bend tightly behind a rack.
Final check
Know before you order
- 01Check whether your DB25 pinout is Tascam or Yamaha standard before ordering
- 02Confirm your gear's TRS jacks are balanced line inputs, not inserts or headphone outs
- 03No adapters, labels, or velcro ties included
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will this work with my Tascam-standard DB25 interface?
Check the pinout your interface uses. DB25 analog wiring follows more than one standard, and a mismatch sends channels to the wrong destinations.
02Can I use it for inserts?
No. This is eight separate balanced channels, one TRS per channel. Insert cables split a single TRS into send and return, which is a different wiring.
03Is 5 ft long enough?
It reaches between adjacent rack units or from a rack-mounted interface to gear a few spaces away. Measure the actual path, including slack for cable dressing.
04Does the TRS end work in unbalanced gear?
A TRS plug in an unbalanced TS jack loses the balanced connection and its noise rejection. Use this between balanced gear on both ends.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black
2 detailsConnections & power
- Jacket Covering
- 2.8 Flexible PVC (0.110 inch)
- Voltage Breakdown
- Must withstand at DC 500V/15sec.
1 detailsIn the box
- Standard
- UL13 CL2 60 deg C
20 detailsOther
- Shield
- 0.031W/m(0.0095W/Ft)
- Served Shield
- Approx. 58/0.10A Served (spiral) Shield
- Inductance
- 0.6H/m(0.18H/Ft)
- Emigration
- Non-emigrant to ABS resin
- K1
- 12pF/m(3.7pF/Ft)
- Electromagnetic Noise At 10khz
- (Inductance of the toroidal core: 595H): 0.1mV Max.
- Microphonics Method
- Stepping on cable: 50mV Max. at 50kW Load
- Microphonics
- Method: Stepping on cable: 50mV Max. at 50kW Load
- Conductor
- 7/0.18A (0.178mmœ) #25AWG (7…#33AWG)
- Insulation
- 1.05 XLPE (Cross Linked Polyethylene) (0.0413 inch)
- Electrostatic Noise Hum Pick Up
- 2.5mV Max.
- Inductance of The Toroidal Core
- 595H): 0.1mV Max.
- Identification
- See core number identification table
- Tensile Strength of One Pair 26 Deg C 65 Rh
- 274N
- Applicable Temperature
- -20 deg C +70 deg C(-4 deg F +158 deg F)
- Capacitance At 1khz 20 Deg C Partial Capacitance Value See Figure 2
- K0: 140pF/m(42.7pF/Ft)
- DC Resistance At 20 Deg C
- Inner Pair Conductor: 0.11W/m(0.0336W/Ft)
- Insulation Resistance At DC 125v 20 Deg C
- 100000 MW … m Minimum
- Drain Wire
- 7/0.18A (Exactly same as conductor)
- Capacitance At 1khz 20 Deg C Partial Capacitance Value See Figure 1
- K0: 130pF/m(40pF/Ft); K1: 12pF/m(3.7pF/Ft)
