Detail 01
DB25 on both ends
Plugs straight into gear with a 25-pin analog port. No breakout, no adapters, no XLR or TRS anywhere.
Product detailSKU #1316705828071
MogamiGold 8-Channel DB25-DB25 Analog Snake 5 ft.
Independent shopping perspective
The Korena take
8-channel analog snake with DB25 connectors on both ends, 5 ft. For linking a patchbay, interface, or converter to outboard gear in a rack.
Strong match
Who this is for
- Connecting an audio interface's DB25 I/O to a patchbay
- Short rack runs where eight channels need one tidy cable
- Studios standardizing on Mogami wire between converters
Consider the trade-offs
When to look elsewhere
- Anyone needing XLR or TRS ends — both ends are DB25
- Runs longer than five feet between rooms or across a stage
- Gear with Tascam-vs-AES pinout mismatch you haven't checked
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
8 channels in one cable
Replaces eight separate runs. One connector seat and unseat instead of eight when you move a rack unit.
Detail 03
5 ft length
Rack-internal length. Enough to reach between units in the same rack, not enough to leave it.
Detail 04
Analog snake, not digital
Wired for line-level analog audio. Not intended as an ADAT, MADI, or digital multichannel link.
Detail 05
Gold-plated contacts
Resists corrosion at the pin interface, which matters most on connections you plug and unplug repeatedly.
Final check
Know before you order
- 01Confirm your gear uses Tascam DB25 pinout — not all 25-pin analog ports match
- 02Direction matters on some rigs: check whether your ports are ins or outs
- 03Measure the rack run first; five feet disappears fast behind gear
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Is this the same as a digital DB25 cable?
No. This is wired as an analog snake for line-level audio. Digital multichannel formats over DB25 use different wiring expectations, so don't assume it will carry them.
02How many channels does it carry?
Eight, in a single cable with a DB25 connector on each end.
03Can I use this to connect to XLR gear?
Not directly. Both ends are DB25. Reaching XLR gear requires a DB25-to-XLR fanout cable instead of this one.
04Will it work with any DB25 audio port?
Only if both devices use the same pinout convention. Check your manuals before ordering, since 25-pin analog ports are not universally wired the same way.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsBody & build
- Color
- Black
- Color Finish
- Gold
