Detail 01
700W dynamic / 325W continuous output
Provides the speaker’s stated amplifier power ratings.
Product detailSKU #1408977824396
YamahaDBR10 10" Powered Speaker
1/8
Independent shopping perspective
The Korena take
The DBR10 is a compact two-way powered speaker built around a 10-inch woofer, 1.4-inch compression driver, and 700W dynamic amplifier. Its onboard two-channel mixer lets you connect a mic or line source on Input 1 and add a second combo or RCA source on Input 2. The XLR output can pass Channel 1 onward or send the two channels together. A 50-degree wedge angle supports floor-monitor placement, while the plastic cabinet, side handles, pole socket, and mounting points provide flexible setup options.
Strong match
Who this is for
- Combining two connected sources through a speaker’s onboard two-channel mixer.
- Using as a floor monitor with its 50-degree wedge cabinet angle.
- Transporting a 23.2-pound powered speaker with two side handles.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
10-inch cone woofer
Identifies the low-frequency driver size in the DBR10.
Detail 03
Input 1 combo; Input 2 combo plus RCA
Lets you connect two input channels, with RCA available on Input 2.
Detail 04
CH1 parallel-through or CH1+CH2 mixed XLR output
Choose between passing Channel 1 onward or sending both channels together.
Detail 05
23.2 lb net weight
Sets the listed weight for transport and setup.
Detail 06
D-CONTOUR: FOH/MAIN, MONITOR, OFF
Offers the listed operating selections for main or monitor use.
Final check
Know before you order
- 01Rigging points fit M8 x 15 mm eyebolts.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can I connect a media player to the DBR10?
Yes. Input 2 includes unbalanced RCA inputs, alongside a combo input.
02Can the DBR10 feed another destination?
Yes. Its XLR output can provide Channel 1 parallel-through or a Channel 1 and 2 mixed signal.
03Can it be used as a floor monitor?
Yes. The cabinet has a 50-degree wedge angle for floor-monitor positioning.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
3 detailsBody & build
- Cabinet material
- Plastic
- Color Finish
- Black
- Flying and mounting hardware
- Bottom x 2, Rear x 1 (Fit for M8 x 15 mm eyebolts)
3 detailsConnections & power
- Output power
- Dynamic:700 W (LF: 500 W, HF: 200 W) / Continuous: 325 W (LF: 260 W, HF: 65 W)
- I/O connectors
- INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
- Maximum output level (1m; on axis)
- 131dB SPL
1 detailsSize & weight
- Net weight
- 10.5 kg (23.2 lbs)
21 detailsOther
- D
- 289mm (11.4")
- H
- 493mm (19.4")
- Components
- Diameter:10" cone, Voice Coil:2", Magnet:Ferrite
- Accessories
- BBS251, BCS251, BWS251-300, BWS251-400 (Optional Speaker bracket)
- Tier
- new
- Finish
- Black
- Power requirements
- 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz
- Category Source
- detail
- Dimensions
- 308mm (12.1")
- Korena Special
- false
- Handle
- Side x 2
- Pole socket
- 35mm (Bottom x 1)
- Heat dissipation
- Fan cooling, 4 speeds
- Type
- 2-way, Bi-amp powered speaker, Bass-reflex type:
- Frequency range (-10dB)
- 55Hz - 20kHz
- Power consumption
- 74W(1/8 Power Consumption), 18W(Idle)
- Nominal coverage, H
- 90, V: 60
- Source Id
- site51408977824396
- Crossover
- 2.1kHz: FIR-X tuning (linear phase FIR filter)
- Processors
- D-CONTOUR: FOH/MAIN, MONITOR, OFF
- HF
- Diaphragm:1.4", Type: 1" throat compression driver, Magnet:Ferrite
Complete your setup
Worth comparing
1 of 12
More from Yamaha
1 of 8
