Detail 01
9.4 kg (20.7 lb) each; 308 x 493 x 289 mm
These are the per-speaker weight and cabinet dimensions to plan around for transport and placement.
Product detailSKU #1424186590591
YamahaCBR10 10" Speaker Pair
1/8
Independent shopping perspective
The Korena take
Yamaha’s CBR10 pair puts two compact, passive 10-inch PA cabinets into a format for small-club audience coverage, floor monitoring, or rigged installation. A wide-dispersion horn is designed to maintain even coverage toward the outer listening area. The plastic enclosures pair a steel front grille with a top handle for transport and venue use, while HF protection limits excessive input reaching the high-frequency unit.
Strong match
Who this is for
- Small-club PA systems using two passive 10-inch cabinets for audience coverage.
- Floor-monitor positions on compact stages using the enclosure’s 50-degree wedge angle.
- Installed systems using the CBR10’s M8 rigging points for supported mounting hardware.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
350 W PGM; 700 W peak
These are the published program and peak power ratings.
Final check
Know before you order
- 01These are passive speakers; account for that configuration when planning the PA system.
- 02Rigging points fit M8 x 15 mm eyebolts. Speaker brackets and standardized eyebolts are optional.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Is this one CBR10 or a pair?
It is a pair of CBR10 speakers.
02What connections are provided?
Each speaker has one speakON jack and one 1/4-inch phone jack.
03Can the CBR10 be used as a floor monitor?
Yes. Its enclosure has an optimized 50-degree wedge angle for floor monitoring.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
3 detailsSound
- Speaker Type
- 2-way Speaker, Bass-reflex Type
- Nominal Impedance
- 8Î
- Frequency Range 10db
- 50 Hz - 20 kHz
4 detailsBody & build
- Flying and Mounting Hardware
- Bottom x 2, Rear x 1 (Fit for M8 x 15mm Eyebolts)
- Cabinet Material
- Plastic
- Body Finish
- Black
- Finish
- Black
2 detailsSize & weight
- Weight
- 9.4
- Net Weight
- 9.4 kg (20.7 lbs)
14 detailsOther
- Crossover
- 2.8 kHz
- D
- 289mm (11.4 inch)
- H
- 493mm (19.4 inch)
- Pole Socket
- Φ35 mmBottom x 1
- Handle
- Top x 1
- Peak
- 700W
- SPL
- Sensitivity (1W; 1m on axis): 94dB SPL
- V
- 60
- Pgm
- 350W
- W
- 308mm (12.1 inch)
- Noise
- 175W
- Peak Calculated
- 123 dB SPL
- Lf
- 10 inch Cone, 2 inch Voice Coil (Ferrite Magnet)
- Hf
- 1 inch Voice Coil, Compression Driver (Ferrite Magnet)
