Detail 01
500W total / 1,000W peak power
The SRM350v3 is a self-powered loudspeaker with the listed continuous total and peak ratings.
Product detailSKU #1396278325945
MackieSRM350v3 1,000W High-Definition Portable Powered Loudspeaker
1/7
Independent shopping perspective
The Korena take
Mackie’s SRM350v3 is a powered loudspeaker built around a 10-inch LF driver and 1.4-inch HF compression driver, with 500W total power and 1,000W peak. The rear-panel two-channel mixer accepts two XLR/TRS sources plus stereo RCA, with separate gain controls, so one cabinet can function as an entire PA system. Its selectable monitor, DJ, and solo-entertainer modes adapt the processing for those uses. Mount it on a floor, pole, or fly point as the system requires.
Strong match
Who this is for
- Compact PA setups using one powered cabinet and its rear-panel two-channel mixer.
- Floor-monitor use where the monitor voicing adds vocal clarity and feedback rejection.
- DJ or solo-entertainer setups using the corresponding Speaker Mode settings.
Consider the trade-offs
When to look elsewhere
- Situations where a 23 lb loudspeaker exceeds the available carrying limit.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
2 combo XLR/TRS inputs plus stereo RCA
The onboard mixer can receive two combo-connected sources and a stereo RCA source.
Detail 03
1 XLR thru output
Provides an XLR thru connection.
Detail 04
90° horizontal × 80° vertical coverage
States the cabinet’s listed horizontal and vertical coverage angles.
Detail 05
Floor, pole, or fly mounting
Supports the three listed placement or mounting options.
Final check
Know before you order
- 01Plan source connections around two XLR/TRS combo inputs and one stereo RCA input.
- 02The cabinet weighs 23 lb.
- 03Select the appropriate Speaker Mode for monitor, DJ, or solo-entertainer use.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can one SRM350v3 operate as a complete PA system?
Yes. Its rear-panel two-channel mixer allows one SRM350v3 to be used as an entire PA system.
02What inputs does the onboard mixer provide?
Two XLR/TRS combo inputs, stereo RCA inputs, and separate gain controls for each channel.
03Can it be used as a floor monitor?
Yes. It can be used as a wedge floor monitor, and its monitor voicing adds upper-end vocal clarity and enhanced feedback rejection.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsSound
- Crossover Frequency
- 3kHz
- Frequency Range 10db
- 50Hz–23kHz
2 detailsBody & build
- Color
- Red
- Enclosure Material
- Polypropylene
5 detailsConnections & power
- Outputs
- 1 x XLR (Thru)
- Total Power
- 500W (1,000W peak)
- Inputs
- 2 x Combo (TRS/XLR), 1 x RCA
- Lf Driver Power Amp
- 400W RMS, Class D
- Hf Driver Power Amp
- 100W RMS, Class AB
4 detailsSize & weight
- Weight
- 23
- Depth
- 13.2 inch
- Width
- 13.1 inch
- Height
- 20.8 inch
6 detailsOther
- Mounting Options
- Floor, Pole, Fly
- Horizontal Coverage Angle
- 90 degrees
- Lf Driver Size
- 10 inch
- Hf Driver Size
- 1.4 inch
- Maximum Peak SPL
- 126dB SPL
- Vertical Coverage Angle
- 80 degrees
