Detail 01
1,000W dynamic / 465W continuous output
Provides the speaker’s stated amplifier power ratings.
Product detailSKU #1408977824386
YamahaDBR12 12" 1,000W Powered Speaker
1/8
Independent shopping perspective
The Korena take
Built around a 12-inch woofer and 1.4-inch compression driver, the DBR12 is a powered two-way speaker with a 1,000W dynamic amplifier and built-in two-channel mixer. It can take a mic or line source on Input 1, then add a second combo or RCA source on Input 2. Choose a mixed output or send Channel 1 through to another destination. The 50-degree cabinet angle also supports floor-monitor placement, while the 35 mm socket and M8 mounting points broaden setup options.
Strong match
Who this is for
- Combining two sources through the onboard mixer for a compact PA setup.
- Using as a floor monitor with the cabinet’s 50-degree wedge angle.
- Pole-mounted or installed speaker setups using the 35 mm socket or M8 points.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
131 dB SPL maximum at 1 m on axis
States its maximum specified output level.
Detail 03
Input 1 combo; Input 2 combo plus RCA
Lets you connect two input channels, with RCA available on Input 2.
Detail 04
CH1 parallel-through or CH1+CH2 mixed XLR output
Choose between passing Channel 1 onward or sending both channels together.
Detail 05
34.8 lb net weight
Sets the listed carry weight for transport and setup.
Detail 06
D-CONTOUR: FOH/MAIN, MONITOR, OFF
Offers the listed operating selections for main or monitor use.
Final check
Know before you order
- 01Optional speaker brackets are sold separately.
- 02Rigging points fit M8 x 15 mm eyebolts.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can I connect two sources directly to the DBR12?
Yes. It has two input channels: Input 1 is a combo input, while Input 2 has a combo input and RCA inputs.
02Can it be used as a floor monitor?
Yes. Its enclosure has a 50-degree wedge angle for floor-monitor positioning.
03What output routing does it offer?
Its XLR output can send Channel 1 in parallel-through mode or a mix of Channels 1 and 2.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
3 detailsBody & build
- Cabinet material
- Plastic
- Color Finish
- Black
- Flying and mounting hardware
- Bottom x 2, Rear x 1 (Fit for M8 x 15 mm eyebolts)
3 detailsConnections & power
- Output power
- Dynamic: 1,000W (LF: 800W, HF: 200W)/Continuous: 465W (LF: 400W, HF: 65W)
- I/O connectors
- INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
- Maximum output level (1m; on axis)
- 131dB SPL
1 detailsSize & weight
- Net weight
- 15.8 kg (34.8 lb.)
21 detailsOther
- D
- 348 mm (13.7")
- H
- 601 mm (23.7")
- Components
- Diameter: 12" cone, Voice Coil: 2", Magnet: Ferrite
- Accessories
- BBS251, BCS251, BWS251-300, BWS251-400 (optional speaker bracket, sold separately)
- Tier
- new
- Finish
- Black
- Power requirements
- 100V, 100–120V, 220–240V, 110/127/220V (Brazil), 50/60Hz
- Category Source
- detail
- Dimensions
- 376 mm (14.8")
- Korena Special
- false
- Handle
- Side x 2
- Pole socket
- 35 mm (Bottom x 1)
- Heat dissipation
- Fan cooling, 4 speeds
- Type
- 2-way, Biamp powered speaker, Bass-reflex type:
- Frequency range (-10dB)
- 52Hz–20kHz
- Power consumption
- 74W (1/8 Power Consumption), 18W (Idle)
- Nominal coverage, H
- 90º, V: 60º
- Source Id
- site51408977824386
- Crossover
- 2.1kHz: FIR-X tuning (linear phase FIR filter)
- Processors
- D-CONTOUR: FOH/MAIN, MONITOR, OFF
- HF
- Diaphragm: 1.4", Type: 1" throat compression driver, Magnet: Ferrite
Complete your setup
Worth comparing
1 of 12
More from Yamaha
1 of 8
