Detail 01
1,000W dynamic / 465W continuous output
Provides the speaker’s stated amplifier power ratings.
Product detailSKU #1408977824391
YamahaDBR15 15" 1,000W Powered Speaker
Sale
1/11
Independent shopping perspective
The Korena take
The DBR15 is a two-way powered speaker with a 15-inch low-frequency driver, a 1.4-inch compression driver, and 1,000W of dynamic output. Its two-channel mixer accepts a mic or line-level source on Channel 1, plus a second combo or RCA source on Channel 2. For system routing, the XLR output can carry Channel 1 through or a combined Channel 1 and 2 signal. Use the 50-degree enclosure angle for floor monitoring, or use its pole socket and M8 rigging points in other configurations.
Strong match
Who this is for
- Mixing a microphone or line source with a second combo or RCA source.
- Creating a symmetrical or stereo floor-monitor arrangement with two DBR15 speakers.
- Pole-mounted or rigged setups that use the speaker’s socket and M8 threads.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
132 dB SPL maximum at 1 m on axis
States its maximum specified output level.
Detail 03
15-inch low-frequency driver
Identifies the larger low-frequency driver used in this DBR model.
Detail 04
Input 1 combo; Input 2 combo plus RCA
Allows two channels, with RCA stereo line-level input available on Channel 2.
Detail 05
42.6 lb net weight
Sets the listed transport weight.
Detail 06
D-CONTOUR: FOH/MAIN, MONITOR, OFF
Offers the listed operating selections for main or monitor use.
Final check
Know before you order
- 01Optional speaker brackets are sold separately.
- 02Rigging points fit M8 x 15 mm eyebolts.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What can I connect to the DBR15?
Channel 1 accepts mic or line level through its combo jack. Channel 2 provides a combo jack and RCA inputs for stereo line-level sources.
02Can I use it as a floor monitor?
Yes. The enclosure has a 50-degree wedge angle, and the DBR15 shape supports mirror-mode monitor configurations.
03How can I route its output?
The XLR output can send Channel 1 only in parallel-through mode or a mixed Channel 1 and 2 output.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Frequency Range 10db
- 50Hz–20kHz
6 detailsBody & build
- Color
- Red
- Type
- 2-way, Biamp powered speaker, Bass-reflex type:
- Body Finish
- Black
- Finish
- Black
- Flying and Mounting Hardware
- Bottom x 2, Rear x 1 (Fit for M8 x 15 mm eye bolts)
- Cabinet Material
- Plastic
5 detailsConnections & power
- Power Requirements
- 100V, 100–120V, 220–240V, 110/127/220V (Brazil), 50/60Hz
- Power Consumption
- 74W (1/8 power consumption), 18W (Idle)
- I O Connectors
- INPUT1: Combo x 1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
- Output Power
- Dynamic: 1,000W (LF: 800W, HF: 200W)/Continuous: 465W (LF: 400W, HF: 65W)
- Maximum Output Level 1 M On Axis
- 132dB SPL
3 detailsSize & weight
- Net Weight
- 19.3 kg (42.6 lb.)
- Weight
- 19.3
- Dimensions
- 455 mm (17.9 inch)
11 detailsOther
- Components
- Diameter: 15 inch cone, Voice Coil: 2 inch, Magnet: Ferrite
- Crossover
- 2.1kHz: FIR-X tuning (linear phase FIR filter)
- Heat Dissipation
- Fan cooling, four speeds
- Pole Socket
- 35 mm (Bottom x 1)
- Processors
- D-CONTOUR: FOH/MAIN, MONITOR, OFF
- Nominal Coverage H
- 90º, V: 60º
- D
- 378 mm (14.9 inch)
- Accessories
- BBS251, BCS251, BWS251-300, BWS251-400 (optional speaker bracket, all sold separately)
- H
- 700 mm (27.6 inch)
- Handle
- Side x 2
- Hf
- Diaphragm: 1.4 inch, Type: 1 inch throat compression driver, Magnet: Ferrite
