Detail 01
1,000W Class-D amplifier
Provides the speaker’s rated amplification.
Product detailSKU #1500000416532
YamahaDHR15 15" 1,000W Powered Speaker
1/5
Independent shopping perspective
The Korena take
Yamaha’s DHR15 is a two-way, bi-amped powered speaker with a 15-inch low-frequency unit, 1.4-inch compression driver, and 1,000W Class-D amplifier. It reaches up to 131dB SPL across a 44Hz–20kHz range. A two-channel mixer accepts microphones, instruments, and line-level sources, while link outputs support chaining units and a ground-lift switch addresses hum. Its plywood enclosure, recessed side handles, rigging points, and dual-angle pole sockets support both transport and installed use.
Strong match
Who this is for
- PA setups needing microphone, instrument, and line-level connections from the speaker’s two-channel mixer.
- Suspended installations using the enclosure’s multiple rigging points.
- Pole-mounted coverage where a zero- or seven-degree tilt angle is needed.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
131dB SPL maximum output
The maximum stated output level is 131dB SPL.
Detail 03
44Hz–20kHz frequency range
Its stated frequency range runs from 44Hz to 20kHz.
Detail 04
17 × 27.2 × 15.9 inches; 52.9 lb
These are the listed cabinet dimensions and weight.
Detail 05
D-Contour dynamic control
It optimizes frequency response according to output level.
Final check
Know before you order
- 01Confirm the local mains supply matches one of the listed voltage options: 100V, 100–120V, 220–240V, or Brazil 110/127/220V.
- 02Plan pole placement around the available 0- or 7-degree socket angles.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can I connect a microphone and an instrument directly?
Yes. The two-channel mixer accepts microphones, instruments, and line-level sources.
02Can multiple DHR15 speakers be linked?
Yes. Link outputs allow multiple DHR15 units to be chained together.
03Is it suitable for suspended installation?
The enclosure has multiple rigging points for suspended installation.
04What is the speaker’s maximum output level?
The listed maximum output level is 131dB SPL.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsSound
- Speaker Type
- 2-way, bi-amped powered speaker
- Frequency Range 10db
- 44Hz–20kHz
1 detailsBody & build
- Color
- Red
3 detailsConnections & power
- Max Output Level
- 131dB SPL
- Power Requirements
- 100V, 100–120V, 220–240V, 110/127/220V (Brazil), 50/60Hz
- Power Consumption
- 74W (1/8 power), 18W (idle)
2 detailsSize & weight
- Dimensions Wxhxd
- 17 inch x 27.2 inch x 15.9 inch
- Weight
- 52.9
2 detailsOther
- A D D A Converters
- 24-bit 48kHz sampling
- Amplifier
- Class-D
