Detail 01
Analog TASCAM-standard pinout
It is wired for the analog DB25 format used by Avid, RME, UA, Yamaha, and other standard DB25 interfaces.
Product detailSKU #1500000481541
HosaEdge Analog Audio Snake - DB25 to XLRF, 4 m
1/3
Independent shopping perspective
The Korena take
Bring eight balanced analog lines from a DB25-equipped interface, patchbay, console, or microphone preamp out to individual XLR female connections. The 4 m format gives a little more reach for studio routing while keeping the connection on the analog TASCAM standard. Oxygen-free copper conductors, XLPE insulation, individual spiral shields, and the metal DB25 hood are all part of the cable’s signal-transfer and shielding design. Black-metal Neutrik XLR connectors finish the breakout end.
Strong match
Who this is for
- Routing eight balanced analog channels between a DB25 studio connection and XLR female breakout points.
- Studio wiring involving microphone preamps, patchbays, consoles, and analog DB25-equipped interfaces.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Individual 58-strand spiral shields
Each channel has its own spiral shielding as part of the cable’s RFI/EMI-rejection design.
Detail 03
4 m length
Provides the supplied four-metre run between the DB25 connection and XLR female breakouts.
Final check
Know before you order
- 01Confirm that the equipment uses the analog TASCAM-standard DB25 pinout.
- 02The breakout end uses XLR female connectors.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many analog channels does this snake carry?
It provides eight balanced analog channels.
02What connectors are on this cable?
It connects DB25 to eight Neutrik XX-Series XLR female connectors.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsBody & build
- Color
- Black
- Conductor Material
- Oxygen-free copper
3 detailsConnections & power
- XLR Connectors
- Neutrik XX-Series XLR female
- Db25 Connector
- Die-cast metal hood
- Connector Format
- DB25 to XLRF
1 detailsSize & weight
- Available Lengths
- 1 m, 2 m, 3 m, 4 m
12 detailsOther
- Conductor Gauge
- 24 AWG
- Pinout
- Analog Tascam standard
- XLR Housing
- Black metal
- Product Type
- Analog audio snake
- XLR Contacts
- Gold
- Channels
- 8
- Series
- Edge
- Shielding
- Individual 58-strand spiral shields
- Model
- EDGE DB25 to XLRF Snake
- Compatibility
- Avid, RME, UA, Yamaha and standard DB25 interfaces
- Dielectric
- XLPE cross-linked polyethylene
- Applications
- Microphone preamps, patchbays, consoles, DB25 interfaces and studio routing
