Detail 01
DB25 to eight XLR female connectors
Breaks one DB25 analog connection into eight XLR female connections.
Product detailSKU #1500000481527
HosaEdge Analog Audio Snake - DB25 to XLRF, 2 m
1/3
Independent shopping perspective
The Korena take
Route eight balanced analog channels from a DB25 connection to eight XLR female breakouts with the 2 m Hosa Edge snake. Its analog TASCAM D-Sub pinout suits studio connections involving DB25-equipped interfaces, patchbays, consoles, and microphone preamps. The cable uses 24 AWG oxygen-free copper conductors, XLPE insulation, and individually shielded channels. A die-cast DB25 hood and Neutrik XX-Series XLR female connectors with gold contacts complete the connection hardware.
Strong match
Who this is for
- Connecting a DB25-equipped interface to eight XLR female studio connections.
- Routing eight balanced analog channels between patchbays, consoles, and microphone preamps.
Consider the trade-offs
When to look elsewhere
- Equipment that does not use the analog TASCAM D-Sub DB25 pinout.
- Connections requiring fewer or more than eight analog channels.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Analog TASCAM D-Sub pinout
Matches the analog DB25 standard used by Avid, RME, UA, Yamaha, and other standard DB25 interfaces.
Detail 03
Individual 58-strand spiral shields
Each channel has its own spiral shield for RFI/EMI rejection.
Detail 04
2 m length
Provides a two-meter run for studio routing.
Final check
Know before you order
- 01Verify that your DB25 equipment uses the analog TASCAM D-Sub standard.
- 02Confirm that eight XLR female breakout connections match your required routing.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many channels does this snake carry?
It carries eight balanced analog channels.
02What are the connector ends?
It has a DB25 connection on one end and eight XLR female breakouts on the other.
03Which DB25 wiring standard does it use?
It is wired to the analog TASCAM D-Sub standard.
04How long is this model?
This SKU is 2 m long.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsBody & build
- Color
- Black
- Conductor Material
- Oxygen-free copper
3 detailsConnections & power
- XLR Connectors
- Neutrik XX-Series XLR female
- Db25 Connector
- Die-cast metal hood
- Connector Format
- DB25 to XLRF
1 detailsSize & weight
- Available Lengths
- 1 m, 2 m, 3 m, 4 m
12 detailsOther
- Conductor Gauge
- 24 AWG
- Pinout
- Analog Tascam standard
- XLR Housing
- Black metal
- Product Type
- Analog audio snake
- XLR Contacts
- Gold
- Channels
- 8
- Series
- Edge
- Shielding
- Individual 58-strand spiral shields
- Model
- EDGE DB25 to XLRF Snake
- Compatibility
- Avid, RME, UA, Yamaha and standard DB25 interfaces
- Dielectric
- XLPE cross-linked polyethylene
- Applications
- Microphone preamps, patchbays, consoles, DB25 interfaces and studio routing
