Detail 01
8 channels
Carries eight balanced analog audio connections.
Product detailSKU #1500000481531
HosaEdge Analog Audio Snake - DB25 to XLRF, 1 m
1/3
Independent shopping perspective
The Korena take
This 1 m Hosa Edge snake breaks eight balanced analog channels from DB25 to XLR female connections. It is wired to the analog TASCAM D-Sub standard for routing between compatible DB25 interfaces and XLR-equipped studio connections such as microphone preamps, patchbays, and consoles. The cable uses 24 AWG oxygen-free copper conductors, XLPE insulation, and individual spiral shields. A die-cast DB25 hood and Neutrik XX-Series XLR female connectors with gold contacts complete the connection hardware.
Strong match
Who this is for
- Short studio runs from a DB25 interface to XLR female microphone-preamp inputs.
- Eight-channel routing between DB25 equipment, patchbays, and consoles.
Consider the trade-offs
When to look elsewhere
- Connections requiring XLR male breakout connectors rather than XLR female connectors.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Analog TASCAM D-Sub pinout
Matches the stated DB25 wiring standard.
Detail 03
Individual 58-strand spiral shields
Each channel has its own spiral shield.
Detail 04
1 m length
Suited to short equipment-to-equipment routing.
Final check
Know before you order
- 01Verify that your DB25 equipment uses the analog TASCAM D-Sub standard.
- 02Confirm that XLR female breakout connections are required.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many channels does this snake carry?
It carries eight balanced analog audio channels.
02Which DB25 interfaces is it compatible with?
It is specified for Avid, RME, UA, Yamaha, and other standard DB25 interfaces using the analog TASCAM D-Sub standard.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsBody & build
- Color
- Black
- Conductor Material
- Oxygen-free copper
3 detailsConnections & power
- XLR Connectors
- Neutrik XX-Series XLR female
- Db25 Connector
- Die-cast metal hood
- Connector Format
- DB25 to XLRF
1 detailsSize & weight
- Available Lengths
- 1 m, 2 m, 3 m, 4 m
12 detailsOther
- Conductor Gauge
- 24 AWG
- Pinout
- Analog Tascam standard
- XLR Housing
- Black metal
- Product Type
- Analog audio snake
- XLR Contacts
- Gold
- Channels
- 8
- Series
- Edge
- Shielding
- Individual 58-strand spiral shields
- Model
- EDGE DB25 to XLRF Snake
- Compatibility
- Avid, RME, UA, Yamaha and standard DB25 interfaces
- Dielectric
- XLPE cross-linked polyethylene
- Applications
- Microphone preamps, patchbays, consoles, DB25 interfaces and studio routing
