Detail 01
3-conductor
Carries a ground, so grounded gear stays grounded. This matters for hum on audio equipment.

Independent shopping perspective
A 3 ft IEC power cable for gear that sits close to the outlet or on the same rack shelf as its power strip. Short by design.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Carries a ground, so grounded gear stays grounded. This matters for hum on audio equipment.
Detail 02
Enough to reach within a rack or across a desk. Not enough to reach a wall outlet across a room.
Detail 03
Replaces the cable that came with your gear rather than requiring you to rewire or repair anything.
Detail 04
Disappears in a rack or behind a stage rig. Label both ends if you run several.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
If the amp has a removable 3-prong power cord, yes. Check that the socket on the amp has three pins inside a D-shaped housing.
Usually not. Three feet works when the outlet or power strip is right at your gear. For a wall run, get a longer cord.
Yes. One end plugs into the wall or power strip, the other into the gear. They are not interchangeable.
The wall-side plug is the US 3-prong pattern. Outside North America you would need a different cord or a plug adapter.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.