Detail 01
Eight balanced analog channels
Carries eight separate analog signal paths in one snake.
Product detailSKU #1500000481538
HosaEdge Analog Audio Snake - DB25 to XLRM, 3 m
1/3
Independent shopping perspective
The Korena take
Hosa’s 3 m Edge snake converts eight balanced analog channels from a DB25 connection into eight XLR male breakouts. It is wired to the analog TASCAM D-Sub standard and is intended for studio signal paths involving interfaces, patchbays, consoles, powered monitors, or summing mixers. Oxygen-free copper conductors, XLPE insulation, individual spiral shields, a metal DB25 hood, and Neutrik XLR connectors make it a purpose-built cable for organized multi-channel routing.
Strong match
Who this is for
- Running eight balanced analog channels between a standard DB25 interface and XLR-equipped studio destinations.
- Connecting patchbays, consoles, powered monitors, or summing mixers in a three-metre studio run.
Consider the trade-offs
When to look elsewhere
- Connections that do not use a DB25 source and XLR male breakout ends.
- Systems outside the analog TASCAM-standard DB25 wiring format.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
DB25 to XLRM
Uses a DB25 connection at one end and XLR male breakouts at the other.
Detail 03
Individual 58-strand spiral shields
Each channel has its own spiral shielding.
Detail 04
3 m length
Provides a three-metre cable run.
Final check
Know before you order
- 01Verify that the connected DB25 equipment uses the analog TASCAM-standard pinout.
- 02Confirm that XLR male breakout connectors are required at the destination.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many channels does this snake carry?
It carries eight channels of balanced analog audio.
02Which DB25 standard does it use?
It is wired to the analog TASCAM D-Sub standard and is listed for Avid, RME, UA, Yamaha, and other standard DB25 interfaces.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsBody & build
- Color
- Black
- Conductor Material
- Oxygen-free copper
3 detailsConnections & power
- XLR Connectors
- Neutrik XX-Series XLR male
- Db25 Connector
- Die-cast metal hood
- Connector Format
- DB25 to XLRM
1 detailsSize & weight
- Available Lengths
- 1 m, 2 m, 3 m, 4 m
12 detailsOther
- Conductor Gauge
- 24 AWG
- Pinout
- Analog Tascam standard
- XLR Housing
- Black metal
- Product Type
- Analog audio snake
- XLR Contacts
- Gold
- Channels
- 8
- Series
- Edge
- Shielding
- Individual 58-strand spiral shields
- Model
- EDGE DB25 to XLRM Snake
- Compatibility
- Avid, RME, UA, Yamaha and standard DB25 interfaces
- Dielectric
- XLPE cross-linked polyethylene
- Applications
- Summing mixers, powered monitors, patchbays, consoles, DB25 interfaces and studio routing
