Detail 01
8 channels
One DB25 connection is broken out to eight balanced analog XLR lines.
Product detailSKU #1500000481537
HosaEdge Analog Audio Snake - DB25 to XLRM, 4 m
1/3
Independent shopping perspective
The Korena take
Built for studio looms that need to turn one DB25 connection into eight male XLR lines, this 4 m Hosa Edge snake handles balanced analog routing between compatible interfaces, patchbays, consoles, summing mixers, and powered monitors. The analog TASCAM D-Sub wiring is the key fit point. Oxygen-free copper conductors, XLPE insulation, individual spiral shields, and the die-cast DB25 hood support a carefully shielded installation, while the black metal XLR housings use gold contacts.
Strong match
Who this is for
- Running eight balanced analog channels from a compatible interface to XLR-connected studio destinations.
- Reaching patchbays, summing mixers, powered monitors, or consoles across a 4 m studio run.
Consider the trade-offs
When to look elsewhere
- Connections that require XLR female breakouts rather than the eight male XLR connectors.
- DB25 equipment that does not use the analog TASCAM D-Sub pinout.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
4 m length
Provides a longer run for routing between studio equipment.
Detail 03
Individual 58-strand spiral shields
Each channel has its own spiral shielding for RFI/EMI rejection.
Final check
Know before you order
- 01Confirm that the DB25 equipment uses the analog TASCAM D-Sub standard.
- 02Confirm that your destination connections need XLR male connectors.
- 03Plan the route for the fixed 4 m cable length.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What is this cable wired to connect?
It routes eight balanced analog channels from a DB25 connection wired to the analog TASCAM D-Sub standard to eight XLR male breakouts.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsBody & build
- Color
- Black
- Conductor Material
- Oxygen-free copper
3 detailsConnections & power
- XLR Connectors
- Neutrik XX-Series XLR male
- Db25 Connector
- Die-cast metal hood
- Connector Format
- DB25 to XLRM
1 detailsSize & weight
- Available Lengths
- 1 m, 2 m, 3 m, 4 m
12 detailsOther
- Conductor Gauge
- 24 AWG
- Pinout
- Analog Tascam standard
- XLR Housing
- Black metal
- Product Type
- Analog audio snake
- XLR Contacts
- Gold
- Channels
- 8
- Series
- Edge
- Shielding
- Individual 58-strand spiral shields
- Model
- EDGE DB25 to XLRM Snake
- Compatibility
- Avid, RME, UA, Yamaha and standard DB25 interfaces
- Dielectric
- XLPE cross-linked polyethylene
- Applications
- Summing mixers, powered monitors, patchbays, consoles, DB25 interfaces and studio routing
