Detail 01
XLR female breakouts
The eight breakout connectors are Neutrik XX-Series XLR female connectors.
Product detailSKU #1500000481540
HosaEdge Analog Audio Snake - DB25 to XLRF, 3 m
1/3
Independent shopping perspective
The Korena take
This 3 m Hosa Edge snake converts a compatible DB25 analog connection into eight female XLR breakouts. It is made for routing between DB25-equipped interfaces, patchbays, consoles, and microphone preamps using the analog TASCAM D-Sub standard. The eight balanced channels use 24 AWG oxygen-free copper, XLPE insulation, and individual spiral shields. At the DB25 end, a die-cast metal hood adds shielding and protection; each XLR female connector is a black metal Neutrik XX-Series model with gold contacts.
Strong match
Who this is for
- Routing eight balanced analog channels between compatible DB25 gear and XLR-connected microphone preamps.
- Patchbay and console wiring that needs female XLR breakouts across a 3 m run.
Consider the trade-offs
When to look elsewhere
- Connections that require XLR male breakouts rather than the eight female XLR connectors.
- DB25 equipment that does not use the analog TASCAM D-Sub pinout.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
3 m length
Suited to studio wiring that calls for a 3 m cable run.
Detail 03
XLPE insulation
The conductors use cross-linked polyethylene insulation.
Final check
Know before you order
- 01Confirm that the DB25 equipment uses the analog TASCAM D-Sub standard.
- 02Confirm that your destination connections need XLR female connectors.
- 03Plan the route for the fixed 3 m cable length.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can it connect a DB25 interface to microphone preamps?
Yes, it is listed for routing compatible DB25 interfaces to XLR female breakout connections, including microphone preamps.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsBody & build
- Color
- Black
- Conductor Material
- Oxygen-free copper
3 detailsConnections & power
- XLR Connectors
- Neutrik XX-Series XLR female
- Db25 Connector
- Die-cast metal hood
- Connector Format
- DB25 to XLRF
1 detailsSize & weight
- Available Lengths
- 1 m, 2 m, 3 m, 4 m
12 detailsOther
- Conductor Gauge
- 24 AWG
- Pinout
- Analog Tascam standard
- XLR Housing
- Black metal
- Product Type
- Analog audio snake
- XLR Contacts
- Gold
- Channels
- 8
- Series
- Edge
- Shielding
- Individual 58-strand spiral shields
- Model
- EDGE DB25 to XLRF Snake
- Compatibility
- Avid, RME, UA, Yamaha and standard DB25 interfaces
- Dielectric
- XLPE cross-linked polyethylene
- Applications
- Microphone preamps, patchbays, consoles, DB25 interfaces and studio routing
