Detail 01
Supercardioid pattern
Tighter front pickup than cardioid, but it picks up some sound directly behind, so keep monitors off the rear axis.

Independent shopping perspective
A 299 dollar supercardioid dynamic with a 1.5-inch element, built for broadcast voice, guitar cabs and loud sources where off-axis rejection matters.


Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01
Tighter front pickup than cardioid, but it picks up some sound directly behind, so keep monitors off the rear axis.
Detail 02
A larger diaphragm than most handhelds; moves more air at low frequencies and gives voices weight up close.
Detail 03
Reaches lower and higher than a typical stage dynamic, so it needs less EQ to sound full and open.
Detail 04
A quiet output. You'll need a preamp with plenty of clean gain, especially on soft speech.
Detail 05
Standard low impedance. Works with any XLR preamp and tolerates long cable runs without losing highs.
Detail 06
Heavy enough to demand a real boom arm or sturdy stand. Light desk arms will droop.
Final check

Product questions
Straight answers to the questions shoppers most often ask about this product.
No. It's a dynamic microphone, so it generates its own signal. Phantom power won't damage it, but it does nothing. What it does need is a preamp with plenty of clean gain.
Not directly. It's an XLR mic with 600 ohm balanced output, so you need an audio interface or mixer with an XLR preamp between the mic and the computer.
Supercardioid narrows the front pickup angle and rejects sound from the sides more sharply, but adds a small rear lobe. Point the back of the mic away from monitors, not the sides.
Yes. It's a dynamic with a large element and a 40Hz-18kHz range, which suits close-miking loud amplifiers where a condenser would be overwhelmed.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.