Detail 01
XLR male to XLR female
The standard mic connection. Plugs straight into any mic and any mic preamp or mixer channel without adapters.
Product detailSKU #1274034478671
D'AddarioMicrophone Cable XLR to XLR 10 ft.
Independent shopping perspective
The Korena take
A 10-foot balanced XLR cable for a single microphone. Enough reach for a vocal or amp mic within a few feet of the stand or interface.
Strong match
Who this is for
- Home studio runs from a mic stand to an interface
- Small stage or rehearsal room mic-to-snake connections
- A spare cable to keep in the gig bag
Consider the trade-offs
When to look elsewhere
- Long stage runs — 10 ft is short once routing is factored in
- Guitars, keyboards or pedals using 1/4-inch jacks
- Anyone needing a mic cable with a built-in DI or adapter
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Balanced connection
Three conductors cancel picked-up hum and noise, so the cable can run near power without adding buzz.
Detail 03
10 ft length
Covers a stand to a nearby interface. Once you route around a desk or riser you lose two or three feet of that.
Detail 04
Black jacket
Disappears against stage floors and dark rooms. Harder to spot when you're untangling a pile of cables.
Final check
Know before you order
- 01Measure your actual routing path, not the straight-line distance — corners eat length fast
- 02Nothing else is included: no adapters, no cable ties, no bag
- 03Condenser mics still need phantom power from the preamp; the cable only passes it
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will this work with a condenser mic?
Yes. It carries phantom power from your interface or mixer the same as any balanced XLR cable. Switch on 48V at the preamp.
02Can I use this for a guitar?
No. Guitars use 1/4-inch jacks. This has XLR connectors on both ends, meant for microphones and other balanced XLR gear.
03Is 10 feet enough for live use?
Only for close work — a mic stand near the board or a wedge monitor. For a full stage, use 20 or 25 feet.
04Can I connect two of these together?
Yes. The male end of one mates with the female end of the other, giving you 20 feet with one extra connection point.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black
