Detail 01
80 watts power handling
Matches amps up to roughly 80 watts. Push a bigger head into it alone and you risk cooking the voice coil.

Independent shopping perspective
A 12-inch, 80-watt replacement guitar speaker at 8 ohms. For players swapping the stock driver in a combo or building a 1x12 cab.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Matches amps up to roughly 80 watts. Push a bigger head into it alone and you risk cooking the voice coil.
Detail 02
Drop-in for most single-speaker combos. Wiring two of these in a cab gives 4 or 16 ohms, not 8.
Detail 03
Standard combo and 1x12 cab size, but check the baffle bolt pattern and rear magnet clearance before ordering.
Detail 04
No cabinet, no wiring harness. You are buying a driver to install in something you already own.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
Usually, if the amp uses a standard 12-inch baffle cutout and an 8-ohm speaker. Check bolt spacing and the depth from baffle to rear panel first.
Yes, but the impedance changes. Two 8-ohm speakers wired in parallel give 4 ohms; in series they give 16. Your amp has to accept that load.
Yes. An 80-watt driver on a 50-watt amp leaves headroom, which is the safer direction for speaker life.
No. This is the speaker only. You supply the combo or cab it mounts into.