Detail 01
15W power rating each
30W total in a 2x12. Push a 50W head into these and you risk cooking the voice coils.
Product detailSKU #1300744185422
CelestionModern Boutique 2x12 Speaker Set
Independent shopping perspective
The Korena take
A pair of 12-inch Alnico Celestion speakers rated 15W each. For a 2x12 cab or combo where early breakup at low volume matters more than headroom.
Strong match
Who this is for
- Low-wattage amps where you want speaker breakup at modest volume
- Reloading a 2x12 cab for vintage-voiced tones
- Studio use where the cab compresses before the room gets loud
Consider the trade-offs
When to look elsewhere
- High-power heads — 15W per speaker gives 30W total handling
- Bass or keyboard rigs needing clean low end
- Players who want clean headroom at stage volume
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Alnico magnet
Alnico compresses and softens earlier than ceramic, so notes bloom instead of staying stiff.
Detail 03
100dB sensitivity
Loud for the wattage. A small amp gets louder through these than a low-sensitivity speaker.
Detail 04
8 and 15 ohm pair
Two impedances in the set. Wire deliberately, since combinations land on different loads than a matched pair.
Detail 05
75-5000Hz range
Rolls off early on top, so no fizz on high gain, and no deep lows either.
Detail 06
9.3 lb each, 6.5 inch depth
Light for 12s and shallow enough for most cabs, but check depth against your baffle clearance.
Final check
Know before you order
- 01Check your amp's output wattage against 30W total handling before wiring these up
- 02Speakers only — no cab, baffle, hardware, or wire
- 03The 8 and 15 ohm ratings mean wiring math, not a drop-in swap
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What amp wattage can these handle?
15W per speaker, so 30W total in a 2x12. Higher-powered heads will exceed what these are rated to take.
02What impedance are they?
The set covers 8 ohms and 15 ohms nominal, with DC resistance of 6.4 and 11.8 ohms. Plan your wiring around the actual final load.
03Will these fit my existing 2x12 cabinet?
Cutout diameter is 11.1 inches, mounting slot PCD 11.7 inches, four slots, 6.5 inch depth. Measure your baffle against those numbers.
04Do they come with mounting hardware?
No. Speakers only. You'll need bolts or screws suited to your baffle.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
4 detailsSound
- Frequency Range
- 75-5000Hz
- Nominal Impedance
- 8 and 15 ohms
- Sensitivity
- 100dB
- Resonance Frequency Fs
- 75Hz
1 detailsBody & build
- Voice Coil Material
- Round copper
1 detailsConnections & power
- Power Rating
- 15W
10 detailsSize & weight
- Nominal Diameter
- 12 inch, 305mm
- Voice Coil Diameter
- 1.75 inch, 44.5mm
- Weight
- 50
- Overall Depth
- 6.5 inch, 165mm
- Magnet Structure Diameter
- 5.0 inch, 128mm
- Diameter
- 12.2 inch, 309mm
- Magnet Weight
- 50oz, 1.42kg
- Cut Out Diameter
- 11.1 inch, 283mm
- Mounting Slot Dimensions
- 0.31 inch, 7.9mm
- Unit Weight
- 9.3lb, 4.2kg
5 detailsOther
- Chassis Type
- Pressed steel
- Number of Mounting Slots
- 4
- Magnet Type
- Alnico
- Mounting Slot Pcd
- 11.7 inch, 297mm
- DC Resistance Re
- 6.4 & 11.8 ohms
