Detail 01
30W per speaker, 16 ohms each
Four together handle around 120W. Series-parallel wiring lands at 16 ohms total, matching most 4x12 cab wiring.

Independent shopping perspective
Four 12-inch 16-ohm ceramic speakers for loading a 4x12 cabinet. For players rebuilding or reconing a cab for classic blues and rock voicing.


Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Four together handle around 120W. Series-parallel wiring lands at 16 ohms total, matching most 4x12 cab wiring.
Detail 02
A classic guitar speaker window. It rolls off harsh top end and does not reach bass-guitar lows.
Detail 03
Loud for the wattage. The cab will feel louder than the 30W rating suggests at the same amp setting.
Detail 04
Firmer and tighter than alnico, with more headroom before the speaker itself starts to compress.
Detail 05
A smaller coil breaks up earlier and warmer, which is where the blues and rock voicing comes from.
Detail 06
Shallow enough for most closed-back 4x12s. Check clearance behind the baffle before ordering.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
Each speaker is 16 ohms. Series-parallel wiring of all four gives 16 ohms total, which suits most tube heads.
Each speaker is rated 30W, so a full set handles about 120W total when the load is shared evenly.
Check the 11.1 inch cutout, 11.7 inch mounting circle, four mounting slots, and 5.3 inch depth against your baffle.
No. The response starts at 75Hz and the 30W rating is aimed at guitar. Bass will push them past their limits.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.