Detail 01
30W each
120W total across four. Low headroom is the point: the cone compresses and adds grit before a stiffer speaker would.
Product detailSKU #1300744182323
CelestionModern Boutique 4x12 Speaker Set
Independent shopping perspective
The Korena take
A matched set of four Celestion 12-inch guitar speakers, 30W each, for loading or reloading a 4x12 cabinet. Low power handling by design.
Strong match
Who this is for
- Reloading a 4x12 cab with matched, low-wattage speakers
- Players chasing speaker breakup at manageable stage volume
- Building a cab from an empty shell
Consider the trade-offs
When to look elsewhere
- High-power heads pushed hard; 30W per speaker is the limit
- Bass players; the 75Hz low end won't take it
- Anyone wanting clean, uncolored full-range reproduction
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
100dB sensitivity
Loud for the wattage. A small amp will sound bigger through these than through a 96dB speaker.
Detail 03
75-5000Hz range
Classic guitar-speaker window. Rolls off the fizz above 5kHz and the flub below 75Hz on its own.
Detail 04
Ceramic magnet, 50oz
Firmer and tighter in the low mids than an alnico of the same size, with less of the alnico compression.
Detail 05
1.75-inch copper voice coil
Modest coil size. Contributes to the earlier breakup rather than staying rigid at volume.
Detail 06
5.3-inch depth, 11.1-inch cutout
Standard 12-inch mounting, four slots on an 11.7-inch pattern. Measure your baffle depth on shallow cabs.
Final check
Know before you order
- 01Speakers only. No cabinet, baffle, wiring, hardware or connectors included.
- 02Plan your wiring: four 8-ohm drivers can land on 2, 8 or 32 ohms.
- 03Confirm your amp's minimum impedance before choosing series or parallel.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How much power can the whole cab handle?
Four 30W speakers give 120W total when the load is wired so power splits evenly. Match that against your amp's output honestly.
02What impedance will my cab be?
With 8-ohm drivers: all parallel is 2 ohms, series-parallel is 8, all series is 32. Series-parallel at 8 ohms is the usual choice.
03Will these fit my existing 4x12?
They use a standard 12-inch layout: 11.1-inch cutout, four slots on an 11.7-inch pattern, 5.3 inches deep. Check depth clearance on shallow cabinets.
04Can I use one for a 1x12 combo?
Yes, if the combo puts out 30W or less into it. Above that you're running the speaker past its rating.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
4 detailsSound
- Frequency Range
- 75-5000Hz
- Nominal Impedance
- 8 ohms
- Sensitivity
- 100dB
- Resonance Frequency Fs
- 85Hz
1 detailsBody & build
- Voice Coil Material
- Rounded copper
1 detailsConnections & power
- Power Rating
- 30W
10 detailsSize & weight
- Nominal Diameter
- 12 inch, 305mm
- Voice Coil Diameter
- 1.75 inch, 44.5mm
- Weight
- 50
- Overall Depth
- 5.3 inch, 135mm
- Magnet Structure Diameter
- 6.1 inch, 156mm
- Diameter
- 12.2 inch, 309mm
- Magnet Weight
- 50oz, 1.42kg
- Cut Out Diameter
- 11.1 inch, 283mm
- Mounting Slot Dimensions
- 0.31 inch, 7.9mm ¸
- Unit Weight
- 10.4lb, 4.7kg
5 detailsOther
- Chassis Type
- Pressed steel
- Number of Mounting Slots
- 4
- Magnet Type
- Ceramic
- Mounting Slot Pcd
- 11.7 inch, 297mm
- DC Resistance Re
- 6.7 ohms & 13.1 ohms
