Detail 01
Triple Cone design
Two tweeter cones are built into the main woofer cone.
Product detailSKU #1500000354639
CelestionF12M-150 Triple Cone Guitar Speaker
Independent shopping perspective
The Korena take
The F12M-150 is a 12-inch, 8-ohm guitar speaker made for amp-modeller and IR-based rigs. Its Triple Cone layout places two tweeter cones within the main woofer cone, extending the specified response from 60Hz to 12kHz. The response is flat and neutral, helping the incoming signal remain free of overpowering coloration. An optimized woofer cone and lighter moving mass aim to retain the responsive, tactile feel associated with a conventional guitar speaker.
Strong match
Who this is for
- Amp-modeller and IR rigs needing near full-range response from a guitar-speaker format.
- Live setups where a neutral speaker response keeps the input signal prominent.
Consider the trade-offs
When to look elsewhere
- Rigs that need a speaker intentionally voiced to add strong coloration to the input signal.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
60Hz–12kHz frequency range
The stated range reaches from low frequencies through 12kHz.
Detail 03
150W nominal power rating
Its stated nominal power figure is 150 watts.
Detail 04
Eight mounting slots
The frame provides eight mounting slots.
Final check
Know before you order
- 01Confirm that your installation calls for an 8-ohm speaker.
- 02Check the cabinet opening and mounting pattern against the 11.1-inch cutout diameter and 11.7-inch mounting-slot PCD.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What is the Triple Cone design?
It integrates two additional tweeter cones into the main woofer cone.
02Is the F12M-150 intended for amp modellers?
Yes. It is designed for use with amp modellers and IRs.
03What impedance is it?
The F12M-150 has an 8-ohm nominal impedance.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
3 detailsSound
- Frequency Range
- 60Hz-12,000Hz
- Nominal Impedance
- 8Ω
- Sensitivity
- 97dB
1 detailsBody & build
- Voice Coil Material
- Round copper
1 detailsConnections & power
- Nominal Power Rating
- 150W
10 detailsSize & weight
- Nominal Diameter
- 12 inch
- Voice Coil Diameter
- 2 inch
- Weight
- 35
- Overall Depth
- 5 inch
- Magnet Structure Diameter
- 5.7 inch
- Diameter
- 11.1 inch
- Magnet Weight
- 35 oz.
- Cut Out Diameter
- 11.1 inch
- Mounting Slot Dimensions
- Ø 0.31 inch
- Unit Weight
- 7.9 lb.
4 detailsOther
- Chassis Type
- Pressed steel
- Number of Mounting Slots
- 8
- Magnet Type
- Ceramic
- Mounting Slot Pcd
- 11.7 inch
