Detail 01
2-pack
Two springs, so a double pedal gets both sides replaced with equal tension instead of one new, one tired.
Product detailSKU #1274115064823
Sound Percussion LabsSPH08 Pro Bass Drum Pedal Springs 2-Pack
Independent shopping perspective
The Korena take
Replacement springs for Sound Percussion Labs SPH08 Pro bass drum pedals, sold in pairs. Buy when a spring has stretched, rusted, or snapped mid-gig.
Strong match
Who this is for
- Drummers whose SPH08 pedal has lost its return snap
- Keeping a spare pair in the stick bag
- Double pedal owners who need both sides matched
Consider the trade-offs
When to look elsewhere
- Drummers on a different pedal brand or model
- Anyone wanting to change pedal feel rather than restore it
- Fixing a beater, footboard, or cam problem
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Model-specific to SPH08 Pro
Length and hook geometry are matched to that pedal. Springs from other pedals often sit at the wrong tension range.
Detail 03
Spring tension is what you adjust
The spring sets how fast the beater returns. A stretched one feels sluggish and loose no matter how you set the nut.
Detail 04
Under six dollars
Cheap enough to keep a backup pair permanently in the bag rather than ordering the night before a gig.
Final check
Know before you order
- 01Confirm your pedal is the SPH08 Pro before ordering
- 02Springs only, no hoops, clamps, or hardware included
- 03Retension after fitting, then check both sides feel the same
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many springs come in the pack?
Two. That covers a double pedal, or one pedal plus a spare.
02Will these fit my other bass drum pedal?
They are made for the Sound Percussion Labs SPH08 Pro. Other pedals use different spring lengths and hook shapes, so fit is not guaranteed.
03Do I need tools to swap a spring?
Usually just loosening the tension nut and unhooking the spring. Nothing beyond what came with the pedal.
04How do I know my spring is worn out?
The beater returns slowly or unevenly, or you have to crank the tension nut much further than before to get the same feel.
