Detail 01
1/4 in mono (TS) plugs
Unbalanced, two-conductor. Standard for guitars, pedals, and instrument-level gear; not for balanced line runs.
Product detailSKU #1275776902265
MogamiPure Patch 1/4" Plug to 1/4" Mono Hi-Definition Patch Cable 6 ft.
Independent shopping perspective
The Korena take
A 6 ft 1/4 in mono patch cable for connecting gear at close range. For pedalboards, patchbays, and short rack-to-amp hops.
Strong match
Who this is for
- Patching between rack gear or a patchbay and outboard units
- Short runs from a pedalboard to an amp input
- Replacing a noisy or intermittent cable in a fixed setup
Consider the trade-offs
When to look elsewhere
- Stage runs where a guitarist needs room to move
- XLR mic connections or balanced DB25 gear
- Speaker cabinet connections
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
6 ft length
Enough for gear sitting side by side or a step away. Too short to walk with on stage.
Detail 03
Mono, not TRS
Carries one signal. It will not work for stereo, inserts, or balanced connections that need the ring conductor.
Detail 04
Straight plugs on both ends
Straight ends need clearance behind a jack. On a crowded pedalboard, angled plugs pack tighter.
Detail 05
Instrument-level cable
Built for signal, not power. Keeps capacitance low so highs survive the run, but it is not a speaker cable.
Final check
Know before you order
- 01Unbalanced cable, so keep it away from power supplies to avoid hum
- 02Sold as one cable; a pedalboard needs several
- 03Measure jack-to-jack clearance if your gear sits tight against a wall or rack
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can I use this between my amp head and cabinet?
No. That connection needs speaker cable, which uses heavier conductors and no shield. Instrument cable can overheat and fail there.
02Is it balanced?
No. Mono 1/4 in is unbalanced. For balanced line connections you need TRS or XLR.
03Will 6 ft work for guitar on stage?
It works if you stand still next to your amp. For any movement you want a longer instrument cable.
04Can I use it for stereo pedals?
Not through one cable. A mono cable carries one channel, so a stereo pedal needs two of them, one per side.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black
