Detail 01
1 foot long
Sized for gear that nearly touches. Anything more has to loop, which is why boards standardize on this length.
Product detailSKU #1275776902234
MogamiPure Patch 1/4" Plug to 1/4" Mono Hi-Definition Patch Cable 1 ft.
Independent shopping perspective
The Korena take
A one-foot mono 1/4-inch patch cable for connecting gear that sits side by side — pedals on a board, rack units, unbalanced patchbay points.
Strong match
Who this is for
- Linking two pedals a few inches apart
- Jumping between rack processors stacked in the same case
- Short unbalanced runs inside a patchbay
Consider the trade-offs
When to look elsewhere
- Guitar to amp — one foot goes nowhere
- Balanced connections; a mono plug carries unbalanced signal only
- Amp head to speaker cabinet, which needs speaker cable
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Mono 1/4-inch (TS) plugs
Unbalanced. Over twelve inches that costs you nothing, but the same wiring would pick up hum on a long run.
Detail 03
1/4-inch on both ends
Fits pedal, amp, and patchbay jacks. Will not fit a mic input or a balanced TRS insert without an adapter.
Detail 04
Black jacket
Vanishes under a pedalboard. Tape or tag the ends now if you ever want to trace signal flow later.
Detail 05
Sold as a single cable
An eight-pedal board needs seven of these. Price the whole set before committing to one brand.
Final check
Know before you order
- 01Measure the actual gap between your pedals first — one foot is generous on a tight board.
- 02Straight plugs need clearance behind each pedal; angled ends fit tighter spacing.
- 03Cable length adds up on a board. Every extra foot is more unbalanced run to your amp.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Is one foot enough between pedals?
For pedals sitting next to each other, yes, usually with slack to spare. Measure jack to jack first — spacing varies a lot by pedal size and layout.
02Can I use this as a balanced patch cable?
No. Mono 1/4-inch plugs are TS, which is unbalanced. A balanced connection needs TRS plugs wired for it on both ends.
03Will it work in a patchbay?
Yes, on unbalanced 1/4-inch patch points. If your bay is wired balanced TRS, this will still pass signal but only unbalanced.
04Can I use it between an amp head and cabinet?
No. Speaker connections need speaker cable, which is unshielded and heavier gauge. Using a patch cable there can damage the amp.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black
