Detail 01
RCA on one end, 1/4" mono on the other
Bridges consumer RCA outputs to gear that only takes 1/4" jacks, without needing a stack of adapters.
Product detailSKU #1275776902285
MogamiPure Patch RCA to 1/4" Mono Hi-Definition Patch Cable 10 ft.
1/2
Independent shopping perspective
The Korena take
A 10 ft cable with an RCA plug at one end and a mono 1/4" at the other, for tying consumer-level gear into pro-style inputs.
Strong match
Who this is for
- Turntable preamp or tape deck into a mixer channel
- DJ gear with RCA outs feeding 1/4" inputs
- Connecting a media player to a powered speaker
Consider the trade-offs
When to look elsewhere
- Microphones — this carries no phantom power and uses no XLR
- Anyone needing a balanced run in a noisy room
- Stereo hookups on a single cable; this is one channel
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Unbalanced signal path
No noise cancellation at the input, so keep the run clear of power cables and dimmers to stay quiet.
Detail 03
Mono
Single channel only. A stereo source needs two cables, one for left and one for right.
Detail 04
10 ft length
Reaches from a DJ table or shelf to a mixer across the room, with slack for repositioning.
Detail 05
Line level, not phono level
A turntable needs a phono preamp ahead of this cable, or the signal arrives far too quiet and thin.
Final check
Know before you order
- 01Buy two for a stereo pair — one cable handles one side
- 02Turntables need a phono preamp first; this does not boost signal
- 03Unbalanced runs pick up hum, so route away from power leads
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Do I need one or two?
Two for stereo. Each cable carries a single channel, so a left and right RCA output needs a cable each.
02Can I plug my turntable straight into this?
Only if the turntable has a built-in phono preamp. Otherwise put an external phono preamp between the deck and this cable.
03Will this work in a guitar amp input?
Physically yes, but a line-level source into a guitar amp input will be far too hot and will distort. Use a line input or a DI.
04Is the 1/4" end TS or TRS?
Mono, so TS — tip and sleeve. It carries one unbalanced channel, which is what the RCA end provides.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black
