Detail 01
RCA to 1/4" mono
Converts one channel of consumer RCA output to a pro-style 1/4" jack. Stereo sources need two of these.
Product detailSKU #1275776902255
MogamiPure Patch RCA to 1/4" Mono Hi-Definition Patch Cable 6 ft.
1/2
Independent shopping perspective
The Korena take
A 6-foot cable with an RCA plug on one end and a 1/4" mono plug on the other. For linking consumer gear to pro inputs.
Strong match
Who this is for
- Turntable or CD player output into a mixer channel
- DJ gear with RCA outs feeding 1/4" line inputs
- Connecting a consumer device to a rack unit or interface
Consider the trade-offs
When to look elsewhere
- Anyone needing matching connectors on both ends
- Balanced runs — this is an unbalanced connection
- Speaker-level connections of any kind
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
6 ft length
Short enough to keep a desk or DJ setup tidy, long enough to reach a rack a few feet away.
Detail 03
Mono / unbalanced
One signal channel, no noise cancellation. Keep runs short and away from power cables to stay quiet.
Detail 04
Black jacket
Hard to tell apart from its partner in a stereo pair — tape or label the left and right ends.
Final check
Know before you order
- 01One cable, one channel — stereo sources need a pair
- 02Check whether your 1/4" input is line level, not mic level
- 03No adapters included; it won't reach XLR or 1/8" jacks
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Do I need one or two?
Two for a stereo source. RCA outputs are usually a left and right pair, and each one needs its own cable to its own 1/4" input.
02Which end goes where?
RCA into the consumer device's output, 1/4" into the mixer, interface or rack input. It works the same in either direction of signal flow.
03Can I use it for a turntable?
Yes, if the turntable has a built-in phono preamp or you run it through one first. A raw phono output is too quiet for a line input.
04Is this balanced?
No. RCA is unbalanced by design, so the connection stays unbalanced. Keep the run short and clear of power supplies to avoid hum.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black
