Detail 01
HiZ/LoZ selectable by channel
Each channel can be set for 70V or 100V high-impedance operation, or 4Ω and 8Ω low-impedance operation.
Product detailSKU #1500000357789
LEA ProfessionalConnect Series Model 84 Amplifier Dante
1/2
Independent shopping perspective
The Korena take
Built around four 80-watt channels, the Connect 84 Dante is for small- to medium-scale installed systems that need selectable low- or high-impedance operation on each channel. Analog and Dante inputs can be routed through its input matrix, while onboard DSP, crossovers, EQ, delay, and limiting support system setup from within the amplifier. Network access can be established through its Wi-Fi hotspot, a venue Wi-Fi network, or Fast Ethernet, with browser, API, and cloud control available for remote oversight.
Strong match
Who this is for
- Small- to medium-scale installations needing four independently selectable 4Ω, 8Ω, 70V, or 100V amplifier channels.
- Installed audio systems that require Dante and analog inputs with network-based control and monitoring.
- Projects needing input routing, per-channel EQ, crossovers, delay, and user-adjustable limiting within the amplifier.
Consider the trade-offs
When to look elsewhere
- Systems that require more than four amplifier channels.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
8-band parametric EQ per channel
EQ can be adjusted independently on every amplifier channel.
Detail 03
100 ms output delay per channel
Delay is available separately for each output channel.
Detail 04
Real-time load monitoring and pilot-tone detection
The amplifier monitors load conditions and can detect pilot tones from internal or external sources.
Detail 05
External I/O
An input supports remote on/off, while an output indicates amplifier health.
Final check
Know before you order
- 01Select the required impedance mode individually for each channel.
- 02AES67 configuration is handled through Dante Controller software.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How can the Connect 84 Dante join a network?
It can use its built-in Wi-Fi access point, a venue Wi-Fi network, or Fast Ethernet over Cat5 or Cat6 cable.
02What inputs does it accept?
The Dante version provides analog and Dante inputs.
03Can inputs be assigned freely to outputs?
Yes. Its routable matrix sends any input to any output and provides primary and secondary input priority.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Frequency Response
- 20Hz to 20kHz, +/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V,-2.5dB @ 20kHz at 2Ω
1 detailsPickups & controls
- Control Monitoring Network
- User Interface Web Browser User Interface, 3rd Party API control, or CLOUD control
6 detailsConnections & power
- Output Delay
- 100ms per channel
- Inputs Analog
- Balanced Inputs with user selectable 26 dB and 34 dB input sensitivity (2CH = 2 inputs, 4CH = 4 inputs, 8CH = 8 inputs)
- Amplifier Output Classification
- Class-D with proprietary smart power bridge technology allowing bridged output functionality without sacrificing an amplifier channel
- Output Protection
- DC, VHF and AC Mains Protection, Overtemp and Current Limiter, fan fault detection
- Power Supply
- Universal switch mode power supply with power factor correction (No PFC in 84, 164, 88 & 168)
- Input Matrix
- routable matrix; any input to any output with primary and secondary input priority
12 detailsOther
- Crossovers
- Up to 48 dB/octave IIR filters (Linkwitz Riley and Butterworth)
- DSP
- DSP Architecture Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with sample rate converters
- Parametric EQ
- 8-band parametric EQ per channel
- Load Monitoring
- realtime load monitoring and pilot tone detection from internal or external sources
- Thd N
- 0.1% (20Hz to 20kHz)
- External I O External I O in
- Toggles Remote On/Off
- Dante Only
- AES 67: configurable via the Dante Controller software
- Crosstalk
- 70dB (20Hz to 20kHz)
- Signal to Noise Level
- 105dB (20Hz to 20kHz referenced to 8Ω)
- External I O Out
- Indicates amplifier health
- User Adjustable Limiting
- Peak Voltage and RMS Voltage
- Operation
- AC Mains 100VAC- 240VAC+/- 15% 50Hz or 60Hz
