Detail 01
350W per channel at 4Ω, 8Ω, 70V, and 100V
The two channels support the listed low- and high-impedance operating options.
Product detailSKU #1500000357784
LEA ProfessionalConnect Series Model 352 Amplifier Dante
1/4
Independent shopping perspective
The Korena take
Connect 352 Dante is a two-channel, 350W-per-channel installation amplifier for 4Ω, 8Ω, 70V, or 100V operation. It combines analog and Dante inputs with a choice of built-in Wi-Fi hotspot, venue Wi-Fi, or Fast Ethernet networking. Once connected, cloud, browser, or third-party API control can handle monitoring and remote commands. Internal DSP gives each channel EQ and crossover tools, and the input matrix supports flexible source-to-output routing with priority settings.
Strong match
Who this is for
- Two-channel installations using 4Ω, 8Ω, 70V, or 100V loudspeaker lines.
- Networked systems that combine Dante and analog sources with remote monitoring.
Consider the trade-offs
When to look elsewhere
- Installations needing more than two amplified channels from one chassis.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Eight-band parametric EQ per channel
Allows channel-by-channel equalization within the amplifier.
Detail 03
100ms output delay per channel
Provides per-channel delay adjustment for system setup.
Detail 04
Remote on/off input and amplifier-health output
Supports remote switching and external health indication.
Final check
Know before you order
- 01Confirm that two channels and the listed 350W-per-channel rating meet the installation requirements.
- 02For Dante operation and remote cloud functions, plan the required network connection.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Does the Connect 352 Dante accept both analog and Dante audio?
Yes. It is specified with analog inputs and Dante inputs.
02Which network connection options are available?
It can use its built-in Wi-Fi access point, the venue’s Wi-Fi, or Fast Ethernet over Cat5 or Cat6.
03Can each channel use 70V or 100V operation?
Yes. Each channel is rated at 350W for 4Ω, 8Ω, 70V, and 100V operation.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Frequency Response
- 20Hz to 20kHz, +/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V,-2.5dB @ 20kHz at 2Ω
1 detailsPickups & controls
- Control Monitoring Network
- User Interface Web Browser User Interface, 3rd Party API control, or CLOUD control
6 detailsConnections & power
- Output Delay
- 100ms per channel
- Inputs Analog
- Balanced Inputs with user selectable 26 dB and 34 dB input sensitivity (2CH = 2 inputs, 4CH = 4 inputs, 8CH = 8 inputs)
- Amplifier Output Classification
- Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel
- Output Protection
- DC, VHF, and AC Mains Protection, Overtemp and Current Limiter, fan fault detection
- Power Supply
- universal switch mode power supply with power factor correction (No PFC in 84, 164, 88, & 168)
- Input Matrix
- Routable matrix; any input to any output with primary and secondary input priority
2 detailsSize & weight
- Dimensions L X W X H Product
- 14.25” x 19” x 1U (362mm x 482mm x 1U) x 1U (362mm x 482mm x 1U)
- Weight
- 352
13 detailsOther
- Crossovers
- Up to 48 dB/Octave IIR Filters (Linkwitz Riley and Butterworth)
- DSP
- DSP Architecture analog devices sigma 96khz DSP processor with 32-bit core with sample rate converters
- Parametric EQ
- 8 Band Parametric EQ per channel
- Load Monitoring
- Realtime load monitoring and pilot tone detection from internal or external sources
- Thd N
- 0.1% (20Hz to 20kHz)
- External I O
- External I/O In: toggles remote on/off
- Dante Only
- Power Supply—universal switch mode power supply with power factor correction (No PFC in 84D, 164D, 88D, & 168D)
- Shipping
- 20” x 22.75” x 3.75” (508mm x 578mm x 95.25mm)
- Crosstalk
- 70dB (20Hz to 20kHz)
- Signal to Noise Level
- 105dB (20Hz to 20kHz referenced to 8Ω)
- External I O Out
- Indicates amplifier health
- User Adjustable Limiting
- Peak Voltage and RMS Voltage
- Operation
- AC Mains 100VAC- 240VAC+/- 15% 50Hz or 60Hz
