Detail 01
8-band parametric EQ per channel
Each amplifier channel has its own eight-band EQ for channel-specific DSP setup.
Product detailSKU #1500000357778
LEA ProfessionalConnect Series Model 164 Amplifier Dante
1/2
Independent shopping perspective
The Korena take
Four channels of 160-watt amplification make the Connect 164 Dante a focused choice for small- to medium-scale installed systems. Each channel can be set for 4-ohm, 8-ohm, 70V, or 100V operation, while analog and Dante inputs support different signal paths. Network it through its Wi-Fi access point, venue Wi-Fi, or FAST Ethernet to use cloud-based control, monitoring, and notifications. Internal DSP, crossovers, per-channel EQ, delay, and input routing keep system setup within the amplifier.
Strong match
Who this is for
- Small- to medium-scale installations that need four independently selectable HiZ or LoZ amplifier channels.
- Networked systems needing Dante and analog inputs alongside remote cloud monitoring and control.
Consider the trade-offs
When to look elsewhere
- Installations requiring more than four amplifier channels.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Up to 48 dB/octave IIR crossovers
Provides Linkwitz-Riley and Butterworth crossover options within the internal DSP.
Detail 03
100 ms output delay per channel
Each output includes up to 100 ms of delay adjustment.
Detail 04
Routable input matrix with priority
Any input can be routed to any output, with primary and secondary input priority.
Detail 05
1U, 14.25 by 19 inches; 12.25 lb
Fits a 1U rack space and weighs 12.25 pounds.
Final check
Know before you order
- 01Cloud functions require connecting the amplifier to a network.
- 02Confirm the required per-channel load type: 4 ohm, 8 ohm, 70V, or 100V.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many channels does the 164 Dante provide?
It has four channels, rated at 160 watts each.
02Can it accept both Dante and analog audio?
Yes. It provides analog and Dante inputs.
03What networking options are available?
You can use its built-in Wi-Fi access point, connect to venue Wi-Fi, or use FAST Ethernet with Cat5 or Cat6 cable.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Frequency Response
- 20Hz to 20kHz, +/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V,-2.5dB @ 20kHz at 2Ω
5 detailsConnections & power
- Output Delay
- 100ms per channel
- Inputs Analog
- Balanced Inputs with user selectable 26 dB and 34 dB input sensitivity (2CH = 2 inputs, 4CH = 4 inputs, 8CH = 8
- Amplifier Output Classification
- Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel
- Output Protection
- DC, VHF, and AC Mains Protection, Overtemp and Current Limiter, fan fault detection User Adjustable Limiting: Peak Voltage and RMS Voltage
- Input Matrix
- routable matrix; any input to any output with primary and secondary input priority
2 detailsSize & weight
- Dimensions L X W X H Product
- 14.25” x 19” x 1U (362mm x 482mm x 1U) x 1U (362mm x 482mm x 1U)
- Weight 164
- 12.25lbs / 5.56kg | Shipping: 16.55lbs / 7.51kg
12 detailsOther
- Crossovers
- Up to 48 dB/Octave IIR Filters (Linkwitz Riley and Butterworth)
- DSP
- DSP architecture analog devices sigma 96khz dsp processor with 32-bit core with sample rate converters
- Parametric EQ
- 8 Band Parametric EQ per channel
- Load Monitoring
- Realtime Load Monitoring and Pilot Tone Detection from Internal or External Sources
- Thd N
- 0.1% (20Hz to 20kHz)
- External I O External I O in
- Toggles Remote On/Off
- Network
- Power Supply Universal Switch Mode Power Supply with Power Factor Correction (No PFC in 84, 164, 88, & 168)
- Dante Only
- Power Supply Universal Switch Mode Power Supply with Power Factor Correction (No PFC in 84D, 164D, 88D, & 168D)
- Shipping
- 20” x 22.75” x 3.75” (508mm x 578mm x 95.25mm)
- Crosstalk
- 70dB (20Hz to 20kHz)
- Signal to Noise Level
- 105dB (20Hz to 20kHz referenced to 8Ω)
- External I O Out
- Indicates Amplifier Health
