Detail 01
80W per channel at 4Ω, 8Ω, 70V, and 100V
Each of the four channels is rated for the listed operating formats.
Product detailSKU #1500000357788
LEA ProfessionalConnect Series Model 84 Amplifier Standard
1/2
Independent shopping perspective
The Korena take
Connect 84 brings four 80W amplifier channels to installations using 4Ω, 8Ω, 70V, or 100V operation. It keeps setup tools close at hand with internal DSP, per-channel eight-band EQ, crossover filters, and up to 100ms of output delay. Built-in Wi-Fi hotspot, venue Wi-Fi, or Fast Ethernet provide the connection for browser, third-party API, or cloud control. External I/O also supports remote on/off operation and amplifier-health indication.
Strong match
Who this is for
- Four-channel installations using the listed 4Ω, 8Ω, 70V, or 100V operating formats.
- Projects needing per-channel EQ, crossover, delay, and remote system monitoring.
Consider the trade-offs
When to look elsewhere
- Systems that require more than 80W per channel.
- Installations requiring more than four amplified channels from one chassis.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Eight-band parametric EQ and 100ms delay per channel
Gives each channel its own equalization and delay controls.
Detail 03
Routable input matrix with primary and secondary priority
Allows input-to-output assignments and source-priority setup.
Detail 04
Load monitoring and pilot-tone detection
Provides real-time load monitoring and detects pilot tones from internal or external sources.
Final check
Know before you order
- 01Verify that 80W per channel meets the requirements of all four amplifier channels.
- 02Plan the appropriate Wi-Fi or Ethernet connection for remote and cloud-control functions.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many channels and how much power does the Connect 84 provide?
It has four channels, each rated at 80W for 4Ω, 8Ω, 70V, and 100V operation.
02What DSP controls are built in?
It includes crossovers, eight-band parametric EQ per channel, and up to 100ms of output delay per channel.
03Can it report amplifier status remotely?
Yes. Cloud monitoring is specified, and its external I/O output indicates amplifier health.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Frequency Response
- 20Hz to 20kHz, +/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V,-2.5dB @ 20kHz at 2Ω
1 detailsPickups & controls
- Control Monitoring Network
- User Interface Web Browser User Interface, 3rd Party API control, or CLOUD control
6 detailsConnections & power
- Output Delay
- 100ms per channel
- Inputs Analog
- Balanced Inputs with user selectable 26 dB and 34 dB input sensitivity (2CH = 2 inputs, 4CH = 4 inputs, 8CH = 8 inputs)
- Amplifier Output Classification
- Class-D with proprietary smart power bridge technology allowing bridged output functionality without sacrificing an amplifier channel
- Output Protection
- DC, VHF and AC Mains Protection, Overtemp and Current Limiter, fan fault detection
- Power Supply
- Universal switch mode power supply with power factor correction (No PFC in 84, 164, 88 & 168)
- Input Matrix
- routable matrix; any input to any output with primary and secondary input priority
12 detailsOther
- Crossovers
- Up to 48 dB/octave IIR filters (Linkwitz Riley and Butterworth)
- DSP
- DSP Architecture Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with sample rate converters
- Parametric EQ
- 8-band parametric EQ per channel
- Load Monitoring
- realtime load monitoring and pilot tone detection from internal or external sources
- Thd N
- 0.1% (20Hz to 20kHz)
- External I O External I O in
- Toggles Remote On/Off
- Dante Only
- AES 67: configurable via the Dante Controller software
- Crosstalk
- 70dB (20Hz to 20kHz)
- Signal to Noise Level
- 105dB (20Hz to 20kHz referenced to 8Ω)
- External I O Out
- Indicates amplifier health
- User Adjustable Limiting
- Peak Voltage and RMS Voltage
- Operation
- AC Mains 100VAC- 240VAC+/- 15% 50Hz or 60Hz
