Detail 01
25W power rating
Low by modern standards on purpose. The cone compresses and breaks up before a high-power driver would, at much lower volume.

Independent shopping perspective
A 25W 12-inch guitar speaker in the 16-ohm version. For players who want speaker breakup and compression at lower volume in a low-wattage amp.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Low by modern standards on purpose. The cone compresses and breaks up before a high-power driver would, at much lower volume.
Detail 02
Must match your amp's output tap. Four of these in a series-parallel 4x12 also yields a 16-ohm cab.
Detail 03
Standard guitar speaker size. Drops into most 1x12, 2x12 and 4x12 baffles cut for a 12.
Detail 04
Voiced with a limited top end for electric guitar. Not intended for bass, keyboards, acoustic amps or PA duty.
Detail 05
A 2x12 or 4x12 needs two or four. Mixing with a different model changes the cab's overall impedance math.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
It can if the amp exceeds 25 watts, especially driven hard. Keep it to amps at or below 25 watts, or use multiple speakers to divide the load.
Only impedance. Pick the one that matches your amp's speaker output, or the value your multi-speaker cab wiring needs.
No. It is voiced for electric guitar and rated at 25 watts, so bass frequencies at volume risk damaging the cone.
Four. Wiring four 16-ohm speakers in series-parallel gives a 16-ohm cabinet.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.