Detail 01
Female to female
It's a coupler, not a splitter. Both ends take a plug, so two cables become one longer cable.

Independent shopping perspective
A 1/4" TRS coupler that joins two cables end to end. For extending headphone or balanced runs, or rescuing a cable that's just short.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
It's a coupler, not a splitter. Both ends take a plug, so two cables become one longer cable.
Detail 02
Three conductors, so it passes tip, ring and sleeve — headphones, stereo signals and balanced lines all get through.
Detail 03
Standard full-size jack, the kind on guitars, headphone amps and mixers — not the 3.5mm size on phones.
Detail 04
Hard, wear-resistant contact surface. Handles repeated plugging better than bare brass; less corrosion-resistant than gold.
Detail 05
Cheap enough to keep spares in several bags rather than hunting for the one you own.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
Yes. A TRS coupler passes mono TS signals fine — the ring contact simply goes unused. Mono guitar and instrument cables join through it normally.
No. Both ends are female and it carries one signal path. You need a Y splitter for that.
Yes, that's a common use. Stereo wiring keeps left and right separate when joining two 1/4" headphone cables.
No. This is full-size 1/4" on both ends. A 3.5mm plug needs a separate step-down adapter.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.