Detail 01
Room Control: 0/−2/−4dB under 500Hz
Gives you low-frequency adjustment for placement close to walls or surfaces.
Product detailSKU #1500000414833
YamahaHS4 4.5" Black Powered Studio Monitors (Pair)
Sale
1/9
Independent shopping perspective
The Korena take
For compact nearfield monitoring, the black HS4 pair combines powered two-way operation with 4.5-inch cone low-frequency drivers and 1-inch dome tweeters. The rated 60Hz–22kHz response gives you a defined listening range for recording and mix decisions. Room Control handles low-frequency adjustment below 500Hz, while High Trim changes the response above 2kHz. Its XLR/TRS combo, RCA, and stereo mini inputs cover several source types, and front-panel volume and headphone connections are immediately accessible.
Strong match
Who this is for
- Close-range recording and mix sessions on a desktop where a compact powered monitor pair is useful.
- Hooking up an interface, mixer, computer, or electric instrument through the monitor's available inputs.
- Making low- and high-frequency adjustments for wall proximity or reflective room surfaces.
Consider the trade-offs
When to look elsewhere
- Work that requires monitor response below the HS4's rated 60Hz lower limit.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
High Trim: +2/0/−2dB above 2kHz
Gives you high-frequency adjustment for harsh, reflective rooms.
Detail 03
26W + 26W dynamic output
The stereo system is rated at 26W per side.
Detail 04
LINE 1 combo XLR/TRS; LINE 2 RCA and stereo mini
Lets the pair accept both professional and consumer-level source connections.
Final check
Know before you order
- 01Confirm that your source uses XLR/TRS, RCA, or stereo mini connection formats.
- 02If placing the monitors near walls, account for the available Room Control adjustment.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What is the difference between LINE 1 and LINE 2 connections?
LINE 1 is a combo XLR/TRS phone input. LINE 2 provides RCA and stereo mini inputs.
02Does the HS4 offer room adjustment?
Yes. Room Control adjusts below 500Hz, and High Trim adjusts above 2kHz.
03Where are the volume and headphone controls?
They are on the front panel.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
4 detailsSound
- Frequency Response 10db
- 60Hz–22kHz
- Nominal Impedance
- 6 ohm
- Frequency Response 3db
- 83Hz–20kHz
- Crossover Frequency
- 2.3kHz
2 detailsPickups & controls
- High Trim Switch
- +2/0/−2dB above 2kHz
- Room Control Switch
- 0/−2/−4dB under 500Hz
3 detailsBody & build
- Color
- Black
- Right Side
- 3.1 kg (6.8 lb.)
- Left Side
- 3.7 kg (8.2 lb.)
8 detailsConnections & power
- Input Impedance
- LINE 1 (COMBO): 20 kohm, LINE 2 (RCA, ST Mini): 10 kohm
- Power Requirements
- 100–240V, 50/60Hz
- Maximum Output Level Measured Peak Iec Noise 1m
- 102dB SPL
- Power Consumption
- 15W
- Input Sensitivity Volume
- Maximum): LINE 1 (COMBO): +4 dBu, LINE 2 (RCA, ST Mini): -10 dBu
- Maximum Input
- LINE 1 (COMBO): +20 dBu, LINE 2 (RCA, ST Mini): +6 dBu
- Maximum Output
- Dynamic, RL= 6 ohm; 26W + 26W
- Input Connectors
- LINE 1: COMBO (XLR/TRS PHONE); LINE 2: RCA, Stereo Mini
6 detailsOther
- Indicator
- Power ON (White LED)
- Enclosure
- Bass-reflex type, Material: MDF
- System Type
- Two-way powered speaker
- Lf
- 4.5 inch Cone
- Front
- Volume
- Hf
- 1 inch Dome
