Detail 01
Room Control: 0/−2/−4dB under 500Hz
Allows low-frequency adjustment when monitor placement is close to walls or surfaces.
Product detailSKU #1500000414834
YamahaHS3 3.5" Powered Studio Monitors (Pair), White
Sale
1/11
Independent shopping perspective
The Korena take
White HS3 monitors provide a compact powered pair for nearfield listening in a desktop studio. The two-way design uses 3.5-inch cone low-frequency drivers and 0.75-inch dome tweeters, with a rated 70Hz–22kHz response. Room Control and High Trim give you practical ways to adjust output around placement near surfaces or in reflective spaces. Connect an interface, mixer, computer, or electric instrument through XLR/TRS, RCA, or stereo mini, then reach volume and the headphone jack from the front panel.
Strong match
Who this is for
- Small desktop recording and mix spaces that need compact powered nearfield monitoring.
- Connecting an interface, mixer, computer, or electric instrument using XLR/TRS, RCA, or stereo mini.
- Adjusting low end for nearby surfaces and high end for a reflective listening space.
Consider the trade-offs
When to look elsewhere
- Work that requires monitor response below the HS3's rated 70Hz lower limit.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
High Trim: +2/0/−2dB above 2kHz
Allows high-frequency adjustment in a harsh, reflective room.
Detail 03
20W + 20W dynamic output
The powered stereo system is specified at 20W per side.
Detail 04
LINE 1 combo XLR/TRS; LINE 2 RCA and stereo mini
Offers connection choices for professional and consumer-level equipment.
Final check
Know before you order
- 01Verify your source has an XLR/TRS, RCA, or stereo mini output.
- 02Allow for Room Control adjustment if the speakers will be placed close to walls.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What is the HS3's rated frequency response?
The HS3 is rated at 70Hz–22kHz at −10dB.
02Can I adjust the high-frequency response?
Yes. High Trim provides +2, 0, or −2dB adjustment above 2kHz.
03Does the HS3 have a front headphone jack?
Yes. The headphone jack and volume control are on the front panel.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
4 detailsSound
- Frequency Response 10db
- 70Hz–22kHz
- Nominal Impedance
- 6 ohm
- Frequency Response 3db
- 85Hz–20kHz
- Crossover Frequency
- 3.2kHz
2 detailsPickups & controls
- High Trim Switch
- +2/0/−2dB above 2kHz
- Room Control Switch
- 0/−2/−4dB under 500Hz
3 detailsBody & build
- Color
- White
- Right Side
- Speaker Input
- Left Side
- Headphone; Speaker Output
8 detailsConnections & power
- Input Impedance
- LINE 1 (COMBO): 20 kohm, LINE 2 (RCA, ST Mini): 10 kohm
- Power Requirements
- 100–240V, 50/60Hz
- Maximum Output Level Measured Peak Iec Noise 1m
- 100dB SPL
- Power Consumption
- 15W
- Input Sensitivity Volume
- Maximum): LINE 1 (COMBO): +4 dBu, LINE 2 (RCA, ST Mini): −10dBu
- Maximum Input
- LINE 1 (COMBO): +20 dBu, LINE 2 (RCA, ST Mini): +6dBu
- Maximum Output
- Dynamic, RL= 6 ohm; THD 0.1%, 1kHz, RL=6 Q 20W + 20W
- Input Connectors
- LINE 1: COMBO (XLR/TRS PHONE); LINE 2: RCA, Stereo Mini
5 detailsOther
- Indicator
- Power ON (White LED)
- Enclosure
- Bass-reflex type, Material: MDF
- System Type
- 2-way Powered speakers
- Front
- Volume
- Hf
- .75 inch dome; LF: 3.5 inch cone
