Detail 01
Cardioid pattern
Supports vocal use while minimizing feedback.
Product detailSKU #1396972634602
ShureSM35-XLR Performance Headset Condenser Microphone
Independent shopping perspective
The Korena take
Hands-free vocal performance is the focus of the SM35-XLR. This cardioid condenser headset uses a traditional XLR connection and pairs its headset format with a preamp for vocal setups where playing and singing happen together. The cardioid capsule is designed to deliver full vocal sound while reducing feedback. The package is ready with two windscreens, a microphone clip, pouch, user guide, and preamp.
Strong match
Who this is for
- Multi-instrumentalists who need hands-free vocals during live performance.
- Stage vocal setups that use a traditional XLR microphone connection.
Consider the trade-offs
When to look elsewhere
- Shure TA4F wireless bodypack connections; this model uses XLR.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
153 dB maximum SPL
Specified maximum SPL is measured at 1% THD with a 1,000-ohm load.
Detail 03
1.1 m cable
Provides the listed 45-inch cable length from the headset.
Final check
Know before you order
- 01Plan for an XLR-based connection; the headset is supplied with a preamp.
- 02The package includes two windscreens, a microphone clip, pouch, and user guide.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What connection does the SM35-XLR use?
It uses a traditional XLR connector.
02What comes with the SM35-XLR?
It includes the headset, preamp, two windscreens, microphone clip, pouch, and user guide.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
3 detailsSound
- Max SPL
- 1,000 ohm load, @ 1% THD: 153dB
- Capsule
- Electret condenser
- Frequency Response
- 40Hz to 20kHz
1 detailsBody & build
- Type
- Headset
4 detailsConnections & power
- Power Requirements
- +5 V DC (nominal), 10 V maximum (DC bias)
- Audio Output Level
- –59 dBV/Pa
- Output Impedance 1khz
- 2,400 ohm
- Connector
- XLR
2 detailsSize & weight
- Equivalent Output Noise Typical A Weighted
- 39dB
- Weight
- 2.53
2 detailsIn the box
- Case or Gig Bag
- Pouch
- Cable
- 1.1 m (45 in.)
6 detailsOther
- Pattern
- Unidirectional Cardioid
- Dynamic Range 1khz 1 000 Ohm Load
- 114dB
- Secondary
- Presentation
- Signal to Noise Ratio 1khz
- 55dB
- Polarity
- Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1
- Primary
- Stage
