Detail 01
Dynamic moving-coil; unidirectional cardioid
The microphone combines a dynamic moving-coil design with a cardioid pickup pattern.
Product detailSKU #1500000360207
ShureMV7X XLR Podcast Microphone
1/12
Independent shopping perspective
The Korena take
MV7X is a dynamic, cardioid XLR microphone for voice-focused recording work. Its XLR connection lets it join an audio setup through the dedicated output, while the unidirectional cardioid pattern is paired with a dynamic capsule described as reducing unwanted background noise and interference. The microphone includes a built-in high-pass filter for low-end rumble, a gain control knob, and an integrated headphone jack with monitor mix. An all-metal housing and 5/8-inch-27 thread mount complete the physical setup.
Strong match
Who this is for
- Recording podcasts with an XLR-based audio setup and direct gain adjustment.
- Voice-over work where low-end rumble can be addressed with the high-pass filter.
- Monitoring a recording through the integrated headphone jack and monitor mix.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
50 Hz to 16,000 Hz
This is the listed frequency-response range.
Detail 03
252 ohms at 1 kHz
This is the specified XLR output impedance at 1 kHz.
Detail 04
5/8-inch-27 thread mount
The microphone has the listed threaded mounting point.
Final check
Know before you order
- 01Its dedicated audio connection is XLR.
- 02Confirm that your mount uses the listed 5/8-inch-27 thread.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What connection does the MV7X use?
It has a dedicated XLR output.
02Does it have a high-pass filter?
Yes, it includes a built-in high-pass filter for low-end rumble.
03Can I monitor through the microphone?
Yes. It has an integrated headphone jack with monitor mix.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
3 detailsSound
- Polar Pattern
- Unidirectional (cardioid)
- Frequency Response
- 50Hz to 16,000Hz
- XLR Sensitivity
- -55 dBV/Pa (1.78 mV) at 1kHz
2 detailsBody & build
- Color
- Black
- Type
- Dynamic (moving coil)
2 detailsConnections & power
- XLR Output Impedance
- 252 ohms at 1kHz
- Connector Type
- XLR
2 detailsSize & weight
- Weight
- 1.21
- Net Weight
- 1.21 lb.
2 detailsOther
- Mounting Type
- 5/8 inch-27 thread mount
- Housing
- All-metal construction
