Korena
Product detailSKU #1500000487655

sE ElectronicsV7 PTT Talkback Dynamic Microphone - Nickel

sE Electronics logo
sE Electronics V7 PTT Talkback Dynamic Microphone - Nickel
1/9

Independent shopping perspective

The Korena take

For crews that need a controlled line to stage, the nickel V7 PTT keeps the communication mic live only for the message itself. Its momentary switch activates while pressed and is designed to operate with virtually no audible click, helping avoid switch noise in wedges, in-ear monitors, or front-of-house systems. The supercardioid dynamic design is aimed at intelligible speech in loud spaces, with no phantom power requirement. It is a practical talkback, shout-mic, or paging choice for live production workflows.

sE Electronics V7 PTT Talkback Dynamic Microphone - Nickel product detail
Product studysE Electronics V7 PTT Talkback Dynamic Microphone - Nickel
sE Electronics V7 PTT Talkback Dynamic Microphone - Nickel alternate view
Alternate view

Strong match

Who this is for

  • Sending short talkback cues through wedge, in-ear-monitor, or front-of-house systems with minimal switch noise.
  • Giving monitor technicians and production crews direct control of stage communication during a performance.

Consider the trade-offs

When to look elsewhere

  • Always-on talkback use, because the microphone only activates when its momentary switch is pressed.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

sE Electronics V7 PTT Talkback Dynamic Microphone - Nickel construction detail

Detail 01

Virtually noiseless momentary push-to-talk switch

Lets the operator open the microphone for a message and close it immediately afterward.

Detail 02

Supercardioid polar pattern

Helps reduce ambient noise and off-axis stage sound around the speaker.

Detail 03

Dynamic capsule

Does not require phantom power.

Detail 04

Gold-plated 3-pin XLR connector

Provides the microphone’s XLR connection.

Final check

Know before you order

  1. 01The operating method is press-to-speak rather than a continuously active microphone.
  2. 02The package includes a mic cradle, thread adapters, locking nuts, an internal windscreen, and a zipper pouch.
sE Electronics V7 PTT Talkback Dynamic Microphone - Nickel close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Can the V7 PTT be used as a paging microphone?

Yes. Along with talkback and shout-mic duties, it is intended for paging and production communication.

02Will pressing the switch make an audible click?

The switch is designed to operate with virtually no audible clicking.

03Is phantom power needed?

No. The dynamic capsule works without phantom power.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

5 detailsSound
Polar Pattern
Supercardioid
Impedance
300 Ohm
Voice Coil
Aluminum
Frequency Response
40Hz–19kHz
Sensitivity
2.0 mV/Pa (-54 dBV)
2 detailsBody & build
Color
Gray
Available Colors
Gold, Nickel, Vintage Edition
1 detailsConnections & power
Connector
3-pin male XLR
3 detailsSize & weight
Length
7.24 inch
Weight
10.83
Diameter
2.13 inch
5 detailsOther
Capsule Type
Dynamic
Accessories
Mic cradle, thread adapters, locking nuts, black internal windscreen, zipper pouch
Magnet
Neodymium
Product Type
Dynamic microphone
Model
V7 PTT

Complete your setup

Worth comparing

More from sE Electronics