Detail 01
1.005 inch cup diameter
Large tenor size. More lip vibrating means more sound, but it costs endurance if your air isn't there.
Product detailSKU #1275776904127
SchilkeStandard Series Large Shank Trombone Mouthpiece in Gold 51D Gold
Independent shopping perspective
The Korena take
Gold-plated Schilke 51D large shank trombone mouthpiece. Deep D cup at 1.005 inches, aimed at strong symphonic tenor players and euphonium doublers.
Strong match
Who this is for
- Orchestral tenor trombone on a large bore horn
- Euphonium players wanting a full, dark tone
- Strong players who can fill a deep cup
Consider the trade-offs
When to look elsewhere
- Beginners or students still developing air support
- Small and medium bore horns with a small shank receiver
- Commercial and lead work needing brightness and projection
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
D cup
Very deep. Adds warmth and low-register body, and pulls brightness out of the tone.
Detail 03
J throat
Open throat. Less resistance and more air required, which is why this suits strong players.
Detail 04
Large shank
Fits large bore tenor and bass receivers only. A medium bore horn will not accept it.
Detail 05
Gold plating
Smoother, warmer feel on the lips than silver, and an alternative if silver causes a reaction.
Detail 06
Doubles on euphonium
The deep cup and large diameter carry over, so one piece covers symphonic trombone and euphonium.
Final check
Know before you order
- 01Check your receiver. Large shank will not seat in a small shank slide.
- 02Mouthpiece only. No horn, case, or pouch included.
- 03Deep cup plus open throat demands air. Expect an adjustment period.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will the 51D fit my trombone?
Only if your slide has a large shank receiver, typical of large bore tenor and bass trombones. Medium and small bore horns need a small shank mouthpiece.
02What's the difference between the 51 and the 51D?
Nearly the same diameter, but the 51 uses a bowl-shaped cup while the 51D goes to a much deeper D cup. The 51D is darker and heavier, and takes more air.
03Can I use this on euphonium?
Yes. Schilke specifically points the 51D at euphonium, where the very large D cup produces a full dark tone.
04Is this a bass trombone mouthpiece?
No. For bass trombone Schilke's larger models like the 58, 59, and 60 run from 1.090 to 1.143 inches. The 51D sits in large bore tenor territory.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Gold
19 detailsOther
- 46
- 24.54mm, .966 inch cup diameter; 15/64 throat. The semi-flat rim has a high point close to the center of the mouthpiece which allows for a great deal of flexibility. Ideally suited for the beginner trombone player.
- 47
- 24.99mm, .984 inch cup diameter; 15/64 throat. For both professionals and students alike, this outstanding mouthpiece combines good response with superior tone quality and intonation.
- 50
- 25.40mm, 1.00 inch cup diameter; 17/64 throat. Particularly adapted to the medium and large-bore tenor trombones. This Schilke standard model make this a fine all-around mouthpiece.
- 51
- 25.63mm, 1.010 inch cup diameter; J throat. A large bowl shaped cup producing a rich tone quality. Ideally suited for large bore tenor and orchestral performers.
- 52
- 25.78mm, 1.015 inch cup diameter; 17/64 throat. Slightly larger diameter than the model 51, this mouthpiece produces a slightly broader sound.
- 53
- 26.24mm, 1.033 inch cup diameter; 15/64 throat. This combination of large cup diameter and bowl shape is widely favored by those who desire a rich full sound.
- 57
- 26.52mm, 1.044 inch cup diameter; 15/64 throat. This model is an excellent choice for those who play tenor and bass trombone.
- 58
- 27.68mm, 1.090 inch cup diameter; 19/64 throat. A highly recommended mouthpiece for those who double on tenor and bass, and the full-time bass trombonist, combining both good intonation with great lower and upper registers.
- 59
- 28.52mm, 1.123 inch cup diameter; 19/64 throat. An outstanding mouthpiece for the full-time bass trombonist, combining great intonation with excellent lower and upper registers.
- 60
- 29.03mm, 1.143 inch cup diameter; 5/16 throat. The largest Schilke bass mouthpiece offering a full body of sound for the experienced player.
- 46d
- 24.76mm, .975 inch cup diameter; 15/64 throat. The cup diameter and volume is slightly larger than the 46, producing a full, resonant tone. Also recommended for the younger baritone/euphonium player.
- 51b
- 25.63mm, 1.010 inch cup diameter; F throat. This mouthpiece incorporates a large diameter with a medium-small B cup and small throat.
- 52d
- 25.78mm, 1.015 inch cup diameter; ¼ throat. Like the model 51D, the large D cup makes this mouthpiece ideal for symphonic trombone playing. Also a good choice for the Euphonium player requiring a larger diameter mouthpiece.
- 51d
- 25.55mm, 1.005 inch cup diameter; J throat. One of the most popular Schilke models, this mouthpiece offers a very large D cup and is excellent for the strong player. It is particularly suited for the Euphonium, producing a full dark tone.
- 47c4
- 25.10mm, .988 inch cup diameter; 15/64 throat. For both professionals and students alike, this outstanding mouthpiece combines good response with superior tone quality and intonation. Like the model 47 but with a slightly wider, semi-flat number 4 rim.
- 52e2
- 25.91mm, 1.020 inch cup diameter; J throat. With its extremely deep E cup and narrower, rounder number 2 rim, this mouthpiece an ideal symphonic choice for the robust player. Also a good choice for Euphonium player requiring more cup volume than the 52D.
- 50c4
- 25.40mm, 1.00 inch cup diameter; F throat. The medium-deep cup and medium-wide rim make this mouthpiece an outstanding choice for medium and large-bore tenor trombones, combining a rich, full sound with a high level of efficiency and playability.
- 51c4
- 25.63mm, 1.010 inch cup diameter; J throat. A large bowl shaped cup producing a rich tone quality. Ideally suited for large bore tenor and orchestral performers. Similar to the model 51, with a slightly shallower cup and semi-flat number 4 rim.
- 44e4
- 24.28mm, .956 inch cup diameter; 15/64 throat. A small cup diameter, this mouthpiece offers a very deep E cup and semi-flat number 4 rim.
