Detail 01
Large shank
Fits large-bore tenor and bass trombones. A small or medium bore horn needs the small-shank version instead.
Product detailSKU #1275776904164
SchilkeStandard Series Large Shank Trombone Mouthpiece in Gold 47 Gold
Independent shopping perspective
The Korena take
Large-shank trombone mouthpiece, model 47, gold-plated. A mid-size cup for large-bore tenor players who don't want the weight of a 51 or 52.
Strong match
Who this is for
- Large-bore tenor trombone in wind ensemble or big band
- Players who find a 51 too wide for endurance
- Switching to gold if silver plating irritates your lip
Consider the trade-offs
When to look elsewhere
- Small-bore tenor horns — large shank won't seat
- Bass trombone; the 58, 59 and 60 are built for that
- Players chasing a dark symphonic sound; look at 51D or 52D
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
.984 inch cup diameter
On the small side for a large-shank piece. Easier endurance and upper register than the 51 or 52, with less low-end spread.
Detail 03
15/64 throat
Standard bore through the mouthpiece. Moderate resistance — it holds the sound together rather than blowing wide open.
Detail 04
Gold plating
Softer and warmer on the lips than silver, and avoids nickel reactions. Slightly grippier when the rim gets wet.
Detail 05
Model 47 vs 51
The 51 is wider with a large bowl cup for orchestral weight. The 47 trades that fullness for response and staying power.
Detail 06
Model 47 vs 47C4
The 47C4 has the same cup with a wider, semi-flat rim. Pick it if you want more contact area spreading the pressure.
Final check
Know before you order
- 01Confirm your horn takes a large shank — small-bore tenors do not
- 02Mouthpiece only; no pouch, brush or case included
- 03A smaller cup than your current piece changes low-register response; allow adjustment time
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Large shank or small shank — which do I need?
It follows your horn's receiver. Large-bore tenor and bass trombones take large shank; small and medium bore tenors take small shank. Check before ordering.
02Is a 47 too small for a large-bore horn?
It's on the smaller end for a large bore, which many players want for endurance and upper register. For a broader orchestral sound, step up to a 51 or 52.
03Can I play bass trombone on this?
No. Bass trombone needs a much larger cup — the 58, 59 or 60 in this line, with wider throats for the low register.
04How does gold plating hold up?
It wears at the rim over years of regular playing and can be replated. Day to day it feels softer than silver and won't trigger nickel sensitivity.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Gold
19 detailsOther
- 46
- 24.54mm, .966 inch cup diameter; 15/64 throat. The semi-flat rim has a high point close to the center of the mouthpiece which allows for a great deal of flexibility. Ideally suited for the beginner trombone player.
- 47
- 24.99mm, .984 inch cup diameter; 15/64 throat. For both professionals and students alike, this outstanding mouthpiece combines good response with superior tone quality and intonation.
- 50
- 25.40mm, 1.00 inch cup diameter; 17/64 throat. Particularly adapted to the medium and large-bore tenor trombones. This Schilke standard model make this a fine all-around mouthpiece.
- 51
- 25.63mm, 1.010 inch cup diameter; J throat. A large bowl shaped cup producing a rich tone quality. Ideally suited for large bore tenor and orchestral performers.
- 52
- 25.78mm, 1.015 inch cup diameter; 17/64 throat. Slightly larger diameter than the model 51, this mouthpiece produces a slightly broader sound.
- 53
- 26.24mm, 1.033 inch cup diameter; 15/64 throat. This combination of large cup diameter and bowl shape is widely favored by those who desire a rich full sound.
- 57
- 26.52mm, 1.044 inch cup diameter; 15/64 throat. This model is an excellent choice for those who play tenor and bass trombone.
- 58
- 27.68mm, 1.090 inch cup diameter; 19/64 throat. A highly recommended mouthpiece for those who double on tenor and bass, and the full-time bass trombonist, combining both good intonation with great lower and upper registers.
- 59
- 28.52mm, 1.123 inch cup diameter; 19/64 throat. An outstanding mouthpiece for the full-time bass trombonist, combining great intonation with excellent lower and upper registers.
- 60
- 29.03mm, 1.143 inch cup diameter; 5/16 throat. The largest Schilke bass mouthpiece offering a full body of sound for the experienced player.
- 46d
- 24.76mm, .975 inch cup diameter; 15/64 throat. The cup diameter and volume is slightly larger than the 46, producing a full, resonant tone. Also recommended for the younger baritone/euphonium player.
- 51b
- 25.63mm, 1.010 inch cup diameter; F throat. This mouthpiece incorporates a large diameter with a medium-small B cup and small throat.
- 52d
- 25.78mm, 1.015 inch cup diameter; ¼ throat. Like the model 51D, the large D cup makes this mouthpiece ideal for symphonic trombone playing. Also a good choice for the Euphonium player requiring a larger diameter mouthpiece.
- 51d
- 25.55mm, 1.005 inch cup diameter; J throat. One of the most popular Schilke models, this mouthpiece offers a very large D cup and is excellent for the strong player. It is particularly suited for the Euphonium, producing a full dark tone.
- 47c4
- 25.10mm, .988 inch cup diameter; 15/64 throat. For both professionals and students alike, this outstanding mouthpiece combines good response with superior tone quality and intonation. Like the model 47 but with a slightly wider, semi-flat number 4 rim.
- 52e2
- 25.91mm, 1.020 inch cup diameter; J throat. With its extremely deep E cup and narrower, rounder number 2 rim, this mouthpiece an ideal symphonic choice for the robust player. Also a good choice for Euphonium player requiring more cup volume than the 52D.
- 50c4
- 25.40mm, 1.00 inch cup diameter; F throat. The medium-deep cup and medium-wide rim make this mouthpiece an outstanding choice for medium and large-bore tenor trombones, combining a rich, full sound with a high level of efficiency and playability.
- 51c4
- 25.63mm, 1.010 inch cup diameter; J throat. A large bowl shaped cup producing a rich tone quality. Ideally suited for large bore tenor and orchestral performers. Similar to the model 51, with a slightly shallower cup and semi-flat number 4 rim.
- 44e4
- 24.28mm, .956 inch cup diameter; 15/64 throat. A small cup diameter, this mouthpiece offers a very deep E cup and semi-flat number 4 rim.
