Korena by Guitar Center
Product detailSKU #1275776903963

SchilkeGold-Plated Trombone Mouthpieces Small Shank 47C4GP Gold

Schilke
Schilke Gold-Plated Trombone Mouthpieces Small Shank 47C4GP Gold
1/8

Independent shopping perspective

The Korena take

Gold-plated Schilke 47C4 trombone mouthpiece, .988-inch cup with a wide semi-flat rim, small shank. For players who already know the 47 fits them.

Schilke Gold-Plated Trombone Mouthpieces Small Shank 47C4GP Gold product detail
Product studySchilke Gold-Plated Trombone Mouthpieces Small Shank 47C4GP Gold
Schilke Gold-Plated Trombone Mouthpieces Small Shank 47C4GP Gold alternate view
Alternate view

Strong match

Who this is for

  • Tenor trombones with a small-shank receiver
  • Long sets where a wider rim eases lip fatigue
  • Players on a 47 who want more rim contact

Consider the trade-offs

When to look elsewhere

  • Large-shank tenor or bass trombone receivers
  • Lead players who need a shallow, bright cup
  • Anyone still testing sizes — plating adds cost, not dimensions

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Schilke Gold-Plated Trombone Mouthpieces Small Shank 47C4GP Gold construction detail

Detail 01

.988-inch (25.10 mm) cup diameter

Mid-large for tenor trombone: enough rim for a full sound without the lip travel of a 51 or 52.

Detail 02

Number 4 semi-flat rim

Flatter and wider than the standard 47 rim. Spreads pressure over more lip, so endurance improves and flexibility drops slightly.

Detail 03

15/64 throat

Schilke's standard bore. Resistance stays moderate, so response is quick rather than wide open.

Detail 04

Small shank

Seats in small and medium-bore tenor slides. It will not fit a large-shank receiver.

Detail 05

Gold plating

Surface finish only. Cup, rim and throat are the same 47C4 dimensions as the plain version.

Final check

Know before you order

  1. 01Check your slide receiver — small shank only, and no adapter is included
  2. 02Rim is wider than the standard 47; expect a short adjustment period
  3. 03Sold as a single mouthpiece — no pouch, brush or case
Schilke Gold-Plated Trombone Mouthpieces Small Shank 47C4GP Gold close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Will this fit my large-bore trombone?

Only if the receiver is small shank. Many large-bore tenors take a large shank, so check the slide before ordering. No adapter is included.

02What's the difference between the 47 and the 47C4?

Cup diameter is nearly identical — .984 versus .988 inch. The C4 adds a wider, semi-flat number 4 rim for more lip support and endurance.

03Does the gold plating change how it plays?

The dimensions are identical to the standard 47C4: .988-inch cup, 15/64 throat, number 4 rim. Plating is the finish, not the playing size.

04Is this suitable for bass trombone?

No. It's a small-shank tenor size at .988 inch. Bass trombone players need a considerably larger cup diameter and a large-shank receiver.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

28 detailsOther
40
22.53 mm, .887" cup diameter; 15/64 throat. Since the cup diameter is small, the upper register is improved. In addition, the tone has considerable projection. It is excellent for the bass trumpet and valve trombone.
42
23.22 mm, .914" cup diameter; 15/64 throat. Slightly larger diameter and deeper than the 42B, the 42 features a standard C cup.
45
24.38 mm, .953" cup diameter; 15/64 throat. The semi-flat rim has a high point close to the center of the mouthpiece which allows for a great deal of flexibility. Ideally suited for the beginner trombone player.
46
24.54 mm, .966" cup diameter; 15/64 throat. Slightly larger than the 45, this is also a good beginner’s mouthpiece.
47
24.99 mm, .984" cup diameter; 15/64 throat. For both professionals and students alike, this outstanding mouthpiece combines good response with superior tone quality and intonation.
50
25.40 mm, 1" cup diameter; 17/64 throat. Particularly adapted to the medium and medium-large bore tenor trombones. The Schilke standard options make this a fine all- around mouthpiece.
51
25.63 mm, 1.01" cup diameter; J throat. A large bowl shaped cup producing a rich tone quality. Ideally suited for large bore tenor and orchestral performers.
52
25.78 mm, 1.015" cup diameter; 17/64 throat. Slightly larger diameter than the model 51, this mouthpiece produces a slightly broader sound.
53
26.24 mm, 1.033" cup diameter; 15/64 throat. This combination of large cup diameter and bowl shape is widely favored by those who desire a rich full sound.
46D
24.76 mm, .975" cup diameter; 15/64 throat. The cup diameter and volume is slightly larger than the 46, producing a full, resonant tone. Also recommended for the younger baritone/euphonium player.
42B
22.99 mm, .921" cup diameter; 15/64 throat. Contour profile – this mouthpiece is well suited for the small tenor trombone and lead or commercial playing.
40B
22.51 mm, .886" cup diameter; 15/64 throat. Extremely small inner rim diameter and shallow B cup. This mouthpiece, with its wide-rounded rim, works well for the trumpet player who doubles on trombone.
52D
25.78 mm, 1.015" cup diameter; 1/4" throat. Like the 51D, the large D cup makes this mouthpiece ideal for symphonic trombone playing. Also a good choice for the euphonium player requiring a larger diameter than the 51D.
47C4
25.10 mm, .988" cup diameter; 15/64 throat. Like the model 47 but with a slightly wider, semi-flat number 4 rim.
Tier
new
44E4
24.28 mm, .956" cup diameter; 15/64 throat. Though a small cup diameter, this mouthpiece offers a very deep E cup and semi-flat number 4 rim.
47B
24.87 mm, .979" cup diameter; C throat. Contour profile – this mouthpiece is a good all-around mouthpiece for the jazz player that is requiring quick response and a resonant high register.
Category Source
detail
45B
24.30 mm, .953" cup diameter; 15/64 throat. Contour profile – designed for the lead trombone player with a larger cup volume than the 43A.
43A
23.57 mm, .924" cup diameter; 15/64 throat. Contour profile – this mouthpiece was designed for the lead trombone player desiring an easy high register.
51B
25.63 mm, 1.01" cup diameter; F throat. This mouthpiece incorporates a large diameter with a medium-small B cup and small throat.
51D
25.55 mm, 1.005" cup diameter; J throat. One of the most popular, this mouthpiece offers a very large D cup and is excellent for the strong player. It is particularly suited for the euphonium, producing a full dark tone.
Korena Special
false
52E2
25.91 mm, 1.020" cup diameter; J throat. With its extremely deep E cup and narrower, rounder number 2 rim makes this mouthpiece an ideal symphonic choice for the robust player. Also a good choice for Euphonium player requiring more cup volume than the 52D.
50C4
25.40 mm, 1" cup diameter; F throat. The medium-deep cup and medium-wide rim make this mouthpiece an outstanding choice for medium and large-bore tenor trombones, combining a rich, full sound with a high level of efficiency and playability.
51C4
25.63 mm, 1.01" cup diameter; J throat. Similar to the model 51 with a slightly shallower cup and semi-flat number 4 rim.
Source Id
site51275776903963
Prop65
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer, and to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Worth comparing

More from Schilke