Detail 01
1.015" cup diameter
Toward the large end of the range. More lip vibrates, giving a broader sound but costing endurance up high.
Product detailSKU #1275776904258
SchilkeGold-Plated Trombone Mouthpieces Small Shank 52DGP Gold
1/8
Independent shopping perspective
The Korena take
Gold-plated small-shank trombone mouthpiece with a 1.015" rim and deep D cup. For symphonic tenor players and euphonium players wanting more diameter.
Strong match
Who this is for
- Orchestral and wind ensemble tenor trombone parts needing weight and depth
- Euphonium players who find the 51D rim too small
- Strong players with the air to fill a large cup
Consider the trade-offs
When to look elsewhere
- Lead and commercial playing where you need easy high register
- Developing players — the large deep cup demands real air support
- Large-bore horns that require a large-shank mouthpiece
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Deep D cup
Extra cup volume darkens and fills out the tone, especially in the low and middle register.
Detail 03
1/4 inch throat
The most open throat on Schilke's trombone list. Freer blow and more volume ceiling, but it takes steady air to control.
Detail 04
Small shank
Fits small and medium bore tenor leadpipes. Unusual pairing — most symphonic-size cups ship on large-shank taper.
Detail 05
Gold plating
Softer, grippier feel on the lip than silver, and an alternative for players who react to silver plate.
Final check
Know before you order
- 01Confirm your horn takes a small shank before ordering this cup size
- 02Mouthpiece only — no pouch, case, or cleaning brush
- 03Stepping up from a 51D means more diameter and a bigger throat at once
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How is the 52D different from the 51D?
The 52D is wider at the rim — 1.015" against 1.005" — and has a 1/4 inch throat where the 51D uses a J. Same deep-cup concept, more diameter and more air.
02Can I use this on euphonium?
Yes, that's one of its intended uses — specifically for euphonium players who want a larger rim diameter than the 51D offers. Check your receiver takes a small-shank taper.
03Will this help my low register?
The deep D cup and open throat favor the low and middle register, adding fullness and volume there. The trade-off shows up above the staff, where the large cup is harder to sustain.
04Is this too big for a high school player?
Likely, yes. A large diameter with a deep cup and open throat needs developed air support. The 45 or 47 are the sizes Schilke points beginners and general players toward.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
28 detailsOther
- 40
- 22.53 mm, .887" cup diameter; 15/64 throat. Since the cup diameter is small, the upper register is improved. In addition, the tone has considerable projection. It is excellent for the bass trumpet and valve trombone.
- 42
- 23.22 mm, .914" cup diameter; 15/64 throat. Slightly larger diameter and deeper than the 42B, the 42 features a standard C cup.
- 45
- 24.38 mm, .953" cup diameter; 15/64 throat. The semi-flat rim has a high point close to the center of the mouthpiece which allows for a great deal of flexibility. Ideally suited for the beginner trombone player.
- 46
- 24.54 mm, .966" cup diameter; 15/64 throat. Slightly larger than the 45, this is also a good beginner’s mouthpiece.
- 47
- 24.99 mm, .984" cup diameter; 15/64 throat. For both professionals and students alike, this outstanding mouthpiece combines good response with superior tone quality and intonation.
- 50
- 25.40 mm, 1" cup diameter; 17/64 throat. Particularly adapted to the medium and medium-large bore tenor trombones. The Schilke standard options make this a fine all- around mouthpiece.
- 51
- 25.63 mm, 1.01" cup diameter; J throat. A large bowl shaped cup producing a rich tone quality. Ideally suited for large bore tenor and orchestral performers.
- 52
- 25.78 mm, 1.015" cup diameter; 17/64 throat. Slightly larger diameter than the model 51, this mouthpiece produces a slightly broader sound.
- 53
- 26.24 mm, 1.033" cup diameter; 15/64 throat. This combination of large cup diameter and bowl shape is widely favored by those who desire a rich full sound.
- 46D
- 24.76 mm, .975" cup diameter; 15/64 throat. The cup diameter and volume is slightly larger than the 46, producing a full, resonant tone. Also recommended for the younger baritone/euphonium player.
- 42B
- 22.99 mm, .921" cup diameter; 15/64 throat. Contour profile – this mouthpiece is well suited for the small tenor trombone and lead or commercial playing.
- 40B
- 22.51 mm, .886" cup diameter; 15/64 throat. Extremely small inner rim diameter and shallow B cup. This mouthpiece, with its wide-rounded rim, works well for the trumpet player who doubles on trombone.
- 52D
- 25.78 mm, 1.015" cup diameter; 1/4" throat. Like the 51D, the large D cup makes this mouthpiece ideal for symphonic trombone playing. Also a good choice for the euphonium player requiring a larger diameter than the 51D.
- 47C4
- 25.10 mm, .988" cup diameter; 15/64 throat. Like the model 47 but with a slightly wider, semi-flat number 4 rim.
- Tier
- new
- 44E4
- 24.28 mm, .956" cup diameter; 15/64 throat. Though a small cup diameter, this mouthpiece offers a very deep E cup and semi-flat number 4 rim.
- 47B
- 24.87 mm, .979" cup diameter; C throat. Contour profile – this mouthpiece is a good all-around mouthpiece for the jazz player that is requiring quick response and a resonant high register.
- Category Source
- detail
- 45B
- 24.30 mm, .953" cup diameter; 15/64 throat. Contour profile – designed for the lead trombone player with a larger cup volume than the 43A.
- 43A
- 23.57 mm, .924" cup diameter; 15/64 throat. Contour profile – this mouthpiece was designed for the lead trombone player desiring an easy high register.
- 51B
- 25.63 mm, 1.01" cup diameter; F throat. This mouthpiece incorporates a large diameter with a medium-small B cup and small throat.
- 51D
- 25.55 mm, 1.005" cup diameter; J throat. One of the most popular, this mouthpiece offers a very large D cup and is excellent for the strong player. It is particularly suited for the euphonium, producing a full dark tone.
- Korena Special
- false
- 52E2
- 25.91 mm, 1.020" cup diameter; J throat. With its extremely deep E cup and narrower, rounder number 2 rim makes this mouthpiece an ideal symphonic choice for the robust player. Also a good choice for Euphonium player requiring more cup volume than the 52D.
- 50C4
- 25.40 mm, 1" cup diameter; F throat. The medium-deep cup and medium-wide rim make this mouthpiece an outstanding choice for medium and large-bore tenor trombones, combining a rich, full sound with a high level of efficiency and playability.
- 51C4
- 25.63 mm, 1.01" cup diameter; J throat. Similar to the model 51 with a slightly shallower cup and semi-flat number 4 rim.
- Source Id
- site51275776904258
- Prop65
- WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer, and to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Worth comparing
1 of 12
More from Schilke
1 of 8
