Detail 01
Batter head
This is the top side you strike. It does not replace the bottom resonant head.

Independent shopping perspective
A 10-inch coated batter head for a rack tom. Sensible replacement head for a stock kit or a spare in the stick bag.


Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
This is the top side you strike. It does not replace the bottom resonant head.
Detail 02
The textured white surface takes some edge off the attack and shortens ring compared with a clear head.
Detail 03
Head size matches the drum's shell diameter, not the hoop. A 10-inch tom takes this.
Detail 04
One head per pack. A full tom setup needs one per drum you are changing.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
Yes, if the drum's shell diameter is 10 inches. Drum head sizes refer to shell diameter, so measure across the shell rather than the outer rim of the hoop.
It is a batter head, made for the side you hit. Resonant heads are thinner and made for the underside, so use the correct one for each side.
Coated gives a warmer, slightly drier note with less ring. Clear is brighter with more sustain. Coated also lets you play brushes.
A drum key to loosen and retension the lugs. Nothing else is required, and no key comes with the head.