Detail 01
RCA to 1/4" mono
Converts between consumer RCA and pro/semi-pro 1/4" jacks in one cable, so you skip a barrel adapter and its extra failure point.
Product detailSKU #1275776902221
MogamiPure Patch RCA to 1/4" Mono Hi-Definition Patch Cable 15 ft.
1/2
Independent shopping perspective
The Korena take
A 15 ft cable with an RCA plug on one end and a 1/4" mono plug on the other, for connecting consumer gear to studio or DJ equipment.
Strong match
Who this is for
- Running a turntable or CD deck output into a mixer's 1/4" input
- Feeding a consumer playback device into an audio interface or studio monitor
- Rack setups where a piece of gear only offers RCA out
Consider the trade-offs
When to look elsewhere
- Anyone needing a plain guitar cable — this will not connect an instrument to an amp
- Stereo runs, since one cable carries a single channel only
- Short-run patching inside a rack, where 15 ft leaves excess to coil
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Mono, not stereo
Carries one channel. A stereo source needs two of these — one for left, one for right.
Detail 03
Unbalanced patch cable
Both connector types here are unbalanced, so keep runs sensible and away from power cables to limit hum pickup.
Detail 04
15 ft length
Reaches across a room or from a rack to a nearby deck. Longer than most in-rack patching needs.
Detail 05
Mogami Pure Patch line
Mogami's dedicated patch cable series. The cost sits in shielding and connector quality rather than any tonal character.
Final check
Know before you order
- 01Buy two if your source is stereo — one cable handles one channel
- 02The 1/4" end is mono/TS, so it will not carry a balanced TRS signal
- 03Line-level gear only; this will not connect an amp head to a speaker cabinet
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Do I need one or two of these?
Two for a stereo source. This is a mono cable carrying one channel, so a turntable or CD player with left and right RCA outputs needs a pair.
02Can I plug my guitar in with this?
No. A guitar needs 1/4" on both ends. This has an RCA plug on one side, which no instrument uses as an output.
03Will this work with a turntable?
It works with a turntable that has a built-in preamp, or with one running through an external phono preamp. A bare phono-level output needs preamplification first.
04Is the 1/4" end balanced?
No. It is mono TS, which is unbalanced. Plugging it into a balanced TRS input still passes signal, but you get no balanced noise rejection on that run.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black
